+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: UCMs (https://www.comfortforums.com/forum-146.html)
+---- Forum: UCM/Pi (https://www.comfortforums.com/forum-138.html)
+---- Thread: UCM/PI Info (/thread-5320.html)
- MJC Electronics - 07-08-2021
Hi all
I\'ve just discovered the massive leaps this project has made since I last looked.
I\'m still struggling on with X10 dimmers which have become even more problematic with the switch to LED lamps. My plan was to replace with Velbus but as I have 35+ X10 DIN rail dimmers and a fair few switches this would be quite a project in terms of time and expense plus there is the worry that even then the dimmers may still be problematic with LED loads.It looks like adding a UCM/PI would open the door to many other lighting technologies some of which would have been built from the ground up to support dimming of LED fixtures so I think this might be the right path.
I want to gather as much information as I can so I\'ve read everything on this forum but there\'s not that much here. I read that most of the forum traffic is on the Slack forum which was originally for beta testers and is now open however I can\'t find a link to that resource.Could someone point me in the right direction please?