+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Troubles (https://www.comfortforums.com/forum-77.html)
+---- Thread: Single chirp from bellbox every 10 seconds (/thread-5985.html)
Single chirp from bellbox every 10 seconds - Pharris14 - 07-17-2026
A single chirp from the bellbox sounder every 10 seconds, this seems to occur after a battery test but continues long after the test is finished. There is a corresponding voltage drop pulse seen on the 12v supply, approximately 1v drop around 300mSec duration. I have isolated the supply to the PIRs and vibration sensors but the chirp remains. The voltage dip is still seen if the bellbox is disconnected.
RE: Single chirp from bellbox every 10 seconds - slychiu - 07-18-2026
That chirpo is due to the siren type pr sound type in Alarms. Look in alarm Types low battery - what siren tupe is assigned to it?
RE: Single chirp from bellbox every 10 seconds - Pharris14 - 07-21-2026
(07-18-2026, 05:31 AM)slychiu Wrote: That chirpo is due to the siren type pr sound type in Alarms. Look in alarm Types low battery - what siren tupe is assigned to it?
LowBattery is assigned Short Trouble and is assigned to keypads only, not bell output.
I have replaced the battery but the chirp remianed, however it has now stopped chirping after several hours.
RE: Single chirp from bellbox every 10 seconds - slychiu - 07-22-2026
If it happens again, send the cclx file to support@cytech.biz