+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: Smart-House/Dupline (https://www.comfortforums.com/forum-109.html)
+--- Thread: DUPLINE SYSTEM (/thread-908.html)
- koutsogiannis - 01-04-2008
Hi
I write first time for with the occasion I would want you to wish good and creative year.
Here in Greece many henceforth installations have become with the dupline (dupline.com) and with InOne by Legrand, but no one from the alarms that exist here do not support this protocols. This means that I can be addressed in houses of small size but also big that have installed the systems and apply with success comfort.
The Legrand has Projects and also 70m2. In the past I made a effort work the dupline with Stargate (www.jdstechnologies.com) and him I accomplished because me they gave his protocol of communication. With Legrand him I did not accomplish, despite only with the IR oy it allocates.
I wait for your news.
Thanks
Thanasis Koutsogiannis
- slychiu - 01-04-2008
We do not have in interface to Dupline, as the product is mainly used in industrial applications rather than residential.
However the serial protocol for the UCM may allow you to send commands to any external device. The protocol can be downloaded from our web site link https://www.cytech.biz/Downloads/Files/163/rs232.pdf
This protocol works with RS232 (UCM05) or Ethernet (UCM/Ethernet) or RS485 (UCM04)
In Comfigurator, there is a Send RS232 Action which allows you to send any arbitrary strong to the UCM to the external device.
Legrand InOne is a closed system. However we have projects where the integrator has opened their RF switch and conected Comfort outputs via relays to \"press\" the switch to control the Legrand system. This should work for you too
- admin - 01-06-2008
This topic has been moved from the Installers area to the Lighting Interfaces forum as it could be of interest to other users
- Billan - 11-04-2009
Here in Greece we are working a lot \"dupline\". If Comfort was cooperating with modbus then it would communicate with dupline. So, a UCM MODBUS would be ideal for us in order to install 10 pieces per year in others people installation.
- slychiu - 11-05-2009
a Modbus interface may be what we could do in future, but it is not immimnent as we have many projects to complete
- Billan - 07-25-2010
any progress with modbus?
- slychiu - 07-28-2010
We are not doing Modbus at the moment. The Comfort Client developed by Julian Wigman has a Modbus plug in, see http://www.comfortforums.com/forum65/1800.html
It is very powerful software and free, you should download and test it, and the Modbus plugin