It is very difficult to check what you have done without a cclx file
The Output 3 may be On but you may have some other event which causes it to turn on
we also cannot verify that you have programmed correctly
There is also the problem whether your connection of the relay to the light is correct
\"relay deactivated but relay remain power on \" does not make sense
we cannot advise properly, I suggest you get an electrician to help.
The Output 3 may be On but you may have some other event which causes it to turn on
we also cannot verify that you have programmed correctly
There is also the problem whether your connection of the relay to the light is correct
Quote:the Relay deactivated, but the Relay remained power on. When I reconnected the IN3 cable to OP3, the Relay activated again, light on and failed to switch off.
\"relay deactivated but relay remain power on \" does not make sense
we cannot advise properly, I suggest you get an electrician to help.