<![CDATA[Comfort Automation/ Security System Forums - Logic Controllers]]> https://www.comfortforums.com/ Sun, 09 Aug 2026 02:49:56 +0000 MyBB <![CDATA[KNX logic controller - upload download ETS program]]> https://www.comfortforums.com/thread-5013.html Mon, 28 Jan 2019 05:30:37 -0500 ]]> https://www.comfortforums.com/thread-5013.html IF this function is at all possible in the future it would be exceptionally handy to have as a function of the controller. 

]]> IF this function is at all possible in the future it would be exceptionally handy to have as a function of the controller. 

]]> <![CDATA[KNX logic controller]]> https://www.comfortforums.com/thread-5009.html Mon, 21 Jan 2019 23:56:28 -0500 ]]> https://www.comfortforums.com/thread-5009.html
It will have all the functions of the UCM/KNX2 except that this is not a UCM that is connected to Comfort.  It is a Controller like Comfort, but without Inputs, Outputs, Voice. messages or Alarm Functions. 

It is like the UCM/Logic Controller, except that instead of ETH03 plug in, it supports the KNX Module
It supports all the Comfort RS485 Bus modules, eg UCMs, IRIO, HIO, MSM
It will have Counters, Flags, Sensors, Responses which are used for logic programming and control.
The applications for this product include;
  • Low cost Logic Engine for KNX - allows use of Comfort extensive logic conditional features
  • Interface between KNX and other modules supported by Comfort , eg C-Bus, Modbus, Velbus, UCM/PI, IRIO, HIO
  • Uses - in Hotels, Commercial and Industrial applications.
This product should be released next month
]]>
It will have all the functions of the UCM/KNX2 except that this is not a UCM that is connected to Comfort.  It is a Controller like Comfort, but without Inputs, Outputs, Voice. messages or Alarm Functions. 

It is like the UCM/Logic Controller, except that instead of ETH03 plug in, it supports the KNX Module
It supports all the Comfort RS485 Bus modules, eg UCMs, IRIO, HIO, MSM
It will have Counters, Flags, Sensors, Responses which are used for logic programming and control.
The applications for this product include;
  • Low cost Logic Engine for KNX - allows use of Comfort extensive logic conditional features
  • Interface between KNX and other modules supported by Comfort , eg C-Bus, Modbus, Velbus, UCM/PI, IRIO, HIO
  • Uses - in Hotels, Commercial and Industrial applications.
This product should be released next month
]]> <![CDATA[Conrtol keys does not work through iphone app]]> https://www.comfortforums.com/thread-4998.html Tue, 08 Jan 2019 16:57:16 -0500 ]]> https://www.comfortforums.com/thread-4998.html
.cclx   Smart Home.cclx (Size: 198 KB / Downloads: 1) ]]>
.cclx   Smart Home.cclx (Size: 198 KB / Downloads: 1) ]]> <![CDATA[Cytech Logic Controllers]]> https://www.comfortforums.com/thread-4951.html Sun, 26 Aug 2018 03:16:13 -0400 ]]> https://www.comfortforums.com/thread-4951.html
LGX01 Logic Engine has 8 inputs and 8 Outputs expandable to 96 Inputs and Outputs, using Slave Expansion and Local Expansion Modules


UCM/Logic Controller is similar to LGX01 Logic Engine, but it does not have any Inputs and Outputs



Photos are not to scale

Both LGX01 and UCM/Logic have Responses, Counters, Flags, Sensors, Time Programs. They can be connnected to all the Comfort UCM Interfaces including USB, Ethernet, KNX, Cbus, Velbus, Modbus, and other Cytech modules like IRIO (Remote Input/Output Module), MSM01 Multi-sensor Module (temperature/Humidity) , HIO Hotel Input/Output, Temperature Sensor.
Power Supply is 12V 1 Amps
These 2 products are powerful low cost products suitable for automation applications





]]>
LGX01 Logic Engine has 8 inputs and 8 Outputs expandable to 96 Inputs and Outputs, using Slave Expansion and Local Expansion Modules


UCM/Logic Controller is similar to LGX01 Logic Engine, but it does not have any Inputs and Outputs



Photos are not to scale

Both LGX01 and UCM/Logic have Responses, Counters, Flags, Sensors, Time Programs. They can be connnected to all the Comfort UCM Interfaces including USB, Ethernet, KNX, Cbus, Velbus, Modbus, and other Cytech modules like IRIO (Remote Input/Output Module), MSM01 Multi-sensor Module (temperature/Humidity) , HIO Hotel Input/Output, Temperature Sensor.
Power Supply is 12V 1 Amps
These 2 products are powerful low cost products suitable for automation applications





]]> <![CDATA[UCM/Log and LGX01 Firmware 7.123 to 7.189]]> https://www.comfortforums.com/thread-4675.html Wed, 12 Apr 2017 04:39:13 -0400 ]]> https://www.comfortforums.com/thread-4675.html Changes
  • Detect LEM or LEM03 connected for main Controller and slave
  • Fixed Bug Scan for Modules via plug in ETH03 (Or USB for UCM/Logic) gave wrong modules if a UCM at ID 1 is not present.
]]> Changes
  • Detect LEM or LEM03 connected for main Controller and slave
  • Fixed Bug Scan for Modules via plug in ETH03 (Or USB for UCM/Logic) gave wrong modules if a UCM at ID 1 is not present.
]]> <![CDATA[New Logic Engine LGX01]]> https://www.comfortforums.com/thread-4511.html Sun, 11 Sep 2016 10:57:24 -0400 ]]> https://www.comfortforums.com/thread-4511.html
LGX01 is a Programmable Controller for Automation Applications which can replace PLCs and with the ability to interface to most  Home automation Systems including Cytech\'s IRIO


LGX01 with ETH03 submodule


LGX01 PCB without submodule

Features
  • 8 inputs, 8 open-collector outputs, expandable to 216 Inputs and 216 outputs
  • 12V - 1Amp wall mount adaptor included
  • Plug in 10 way connector for ETH03 submodule. This acts like a UCM General, for use with Comfigurator and iOS/Android apps or ComfortClient. Submodule is ordered separately.
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • Able to send 250 IR Codes to AV and airconditioners
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB Universal, Z-Wave etc
  • Programmable via the  ETH03 plugin submodule with Comfigurator
  • PCB only. EN01 or EN03 enclosures are available
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic condtitions (If/Then/Else)
  • Interface to UCM/Universal,  C-Bus, KNX, Z-Wave, Velbus, GSM, Modbus etc
  • Interface between 2 systems eg Zwave to KNX etc
  • iPhone app to control and monitor system
  • Control on/off lighting via two way switches with TWS ( with relay and current sensor)
  • Control airconditioning  and AV equipment via IR signals (250 codes)
Options/Expansions
  • Up to 8  UCMs (eg RS232, USB, Ethernet, Cbus, KNX, Zwave, Velbus, Universal, GSM, Modbus)
  • Up to 8 IRIO
  • Expandable to 96 Inputs/outputs using LEM and SEM, and a further 120 I/O using RIO
This is essentially a Comfort PCB without the alarm, dialer, voice, recording, intercom functions.
Logic Engine Differences with Comfort
  1. It  is NOT an alarm system. Inputs trigger Responses, do not activate alarms.
  2. It is not connected to the phone line and does not auto-answer calls or dial to phones
  3. Does not have  a voice menu or  make announcements
  4. No  Message recording and Playback
  5. No Intercom Functions
  6. No battery charger, does not need backup battery
Part Numbers

  1. LGX01 Logic Engine PCB with 12V 1A universal wallmount  power supply without enclosure
Link to Cytech Products Page https://www.cytech.biz/logic_engine_controller_pcb.html

Link to LGX01 Manual (In Downloadable Files) https://www.cytech.biz/logic_engine_controller_pcb.html

The UCM/Logic is a low cost controller without Inputs and Outputs  but otherwise with the same features as LGX01 http://www.comfortforums.com/forum117/4459.html
]]>
LGX01 is a Programmable Controller for Automation Applications which can replace PLCs and with the ability to interface to most  Home automation Systems including Cytech\'s IRIO


LGX01 with ETH03 submodule


LGX01 PCB without submodule

Features
  • 8 inputs, 8 open-collector outputs, expandable to 216 Inputs and 216 outputs
  • 12V - 1Amp wall mount adaptor included
  • Plug in 10 way connector for ETH03 submodule. This acts like a UCM General, for use with Comfigurator and iOS/Android apps or ComfortClient. Submodule is ordered separately.
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • Able to send 250 IR Codes to AV and airconditioners
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB Universal, Z-Wave etc
  • Programmable via the  ETH03 plugin submodule with Comfigurator
  • PCB only. EN01 or EN03 enclosures are available
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic condtitions (If/Then/Else)
  • Interface to UCM/Universal,  C-Bus, KNX, Z-Wave, Velbus, GSM, Modbus etc
  • Interface between 2 systems eg Zwave to KNX etc
  • iPhone app to control and monitor system
  • Control on/off lighting via two way switches with TWS ( with relay and current sensor)
  • Control airconditioning  and AV equipment via IR signals (250 codes)
Options/Expansions
  • Up to 8  UCMs (eg RS232, USB, Ethernet, Cbus, KNX, Zwave, Velbus, Universal, GSM, Modbus)
  • Up to 8 IRIO
  • Expandable to 96 Inputs/outputs using LEM and SEM, and a further 120 I/O using RIO
This is essentially a Comfort PCB without the alarm, dialer, voice, recording, intercom functions.
Logic Engine Differences with Comfort
  1. It  is NOT an alarm system. Inputs trigger Responses, do not activate alarms.
  2. It is not connected to the phone line and does not auto-answer calls or dial to phones
  3. Does not have  a voice menu or  make announcements
  4. No  Message recording and Playback
  5. No Intercom Functions
  6. No battery charger, does not need backup battery
Part Numbers

  1. LGX01 Logic Engine PCB with 12V 1A universal wallmount  power supply without enclosure
Link to Cytech Products Page https://www.cytech.biz/logic_engine_controller_pcb.html

Link to LGX01 Manual (In Downloadable Files) https://www.cytech.biz/logic_engine_controller_pcb.html

The UCM/Logic is a low cost controller without Inputs and Outputs  but otherwise with the same features as LGX01 http://www.comfortforums.com/forum117/4459.html
]]> <![CDATA[UCM/Logic Controller]]> https://www.comfortforums.com/thread-4459.html Sat, 28 May 2016 06:42:21 -0400 ]]> https://www.comfortforums.com/thread-4459.html

Photo: UCM/Logic Controller PCB with ETH03 plug in

The UCM/Logic is an Automation Controller which can replace Comfort CM9000 in a network which can include any UCM (KNX, CBUS, Z-Wave, GSM, Modbus etc), IRIO (Intelligent Remote I/O), HIO (Hotel I/O), or TSM (Temperature Sensing Module).

UCM/Logic is applicable to an automation system which does not require the Comfort Intruder Alarm, but has the same capability of Comfort for Responses, Time Programs, Counters, Flags, and Sensors.  It is used as a central controller to link IRIOs with Cbus, KNX, Zwave Modbus and other automation systems.

It does not have the Voice recording/playback, voice menu, dial out, and telephone interface of Comfort and does not have any inputs and outputs.

The UCM/Logic supports a plug in USB, RS232 or ETH03 ethernet submodule for programming and communications. With the ETH03 plug-in, the Comfort apps for mobile and tablet can be used to access and control the system. The UCM/Logic is a combination of a controller and a UCM when the ETH03 or USB submodule is plugged in.

The Power supply is 12V 1A universal wallmount adaptor (supplied)

The UCM/Logic Manual can be downloaded from https://www.cytech.biz/product_details.php?item_id=460

The UCM/Logic can be programmed using Comfigurator 3.11.3 and above. It does not need a separate UCM

Features
  • No Inputs or Outputs
  • 12V - 1Amp wall mount adaptor included
  • Plug in 10 way connector for ETH03,USB or Rs232 submodule. This acts like a UCM General, for use with Comfigurator and iOS/Android apps or ComfortClient. Submodule is ordered separately.
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB Universal, Z-Wave. Modbus etc
  • Programmable via the USB or ETH03 plugin submodule with Comfigurator
  • PCB only. EN01 or EN03 enclosures are available
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic conditions (If/Then/Else)
  • Interface to UCM/Universal,  C-Bus, KNX, Z-Wave, Velbus, GSM, Modbus etc
  • Interface between 2 systems eg Zwave to KNX etc
  • iOS and Android apps to control and monitor system
  • Touchscreen control using KT03 monochrome touchscreen
Options/Expansions
  • Up to 8  UCMs (eg RS232, USB, Ethernet, Cbus, KNX, Zwave, Modbus, Universal, GSM )
  • Up to 8 IRIOs with automation functions
This is the same as the LGX01 Logic Engine without I/O

Part Numbers

  1. UCM/Logic PCB with 12V 1A universal wallmount  power supply
  2. ETH03 Ethernet submodule for connection to LAN, for iOS, Android apps and Comfigurator
  3. USB01 USB submdoule for Comfigurator programming
LGX01 Logic Enginer is a logic controller with 8 Inputs and Outputs http://www.comfortforums.com/forum117/4511.html


]]>

Photo: UCM/Logic Controller PCB with ETH03 plug in

The UCM/Logic is an Automation Controller which can replace Comfort CM9000 in a network which can include any UCM (KNX, CBUS, Z-Wave, GSM, Modbus etc), IRIO (Intelligent Remote I/O), HIO (Hotel I/O), or TSM (Temperature Sensing Module).

UCM/Logic is applicable to an automation system which does not require the Comfort Intruder Alarm, but has the same capability of Comfort for Responses, Time Programs, Counters, Flags, and Sensors.  It is used as a central controller to link IRIOs with Cbus, KNX, Zwave Modbus and other automation systems.

It does not have the Voice recording/playback, voice menu, dial out, and telephone interface of Comfort and does not have any inputs and outputs.

The UCM/Logic supports a plug in USB, RS232 or ETH03 ethernet submodule for programming and communications. With the ETH03 plug-in, the Comfort apps for mobile and tablet can be used to access and control the system. The UCM/Logic is a combination of a controller and a UCM when the ETH03 or USB submodule is plugged in.

The Power supply is 12V 1A universal wallmount adaptor (supplied)

The UCM/Logic Manual can be downloaded from https://www.cytech.biz/product_details.php?item_id=460

The UCM/Logic can be programmed using Comfigurator 3.11.3 and above. It does not need a separate UCM

Features
  • No Inputs or Outputs
  • 12V - 1Amp wall mount adaptor included
  • Plug in 10 way connector for ETH03,USB or Rs232 submodule. This acts like a UCM General, for use with Comfigurator and iOS/Android apps or ComfortClient. Submodule is ordered separately.
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB Universal, Z-Wave. Modbus etc
  • Programmable via the USB or ETH03 plugin submodule with Comfigurator
  • PCB only. EN01 or EN03 enclosures are available
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic conditions (If/Then/Else)
  • Interface to UCM/Universal,  C-Bus, KNX, Z-Wave, Velbus, GSM, Modbus etc
  • Interface between 2 systems eg Zwave to KNX etc
  • iOS and Android apps to control and monitor system
  • Touchscreen control using KT03 monochrome touchscreen
Options/Expansions
  • Up to 8  UCMs (eg RS232, USB, Ethernet, Cbus, KNX, Zwave, Modbus, Universal, GSM )
  • Up to 8 IRIOs with automation functions
This is the same as the LGX01 Logic Engine without I/O

Part Numbers

  1. UCM/Logic PCB with 12V 1A universal wallmount  power supply
  2. ETH03 Ethernet submodule for connection to LAN, for iOS, Android apps and Comfigurator
  3. USB01 USB submdoule for Comfigurator programming
LGX01 Logic Enginer is a logic controller with 8 Inputs and Outputs http://www.comfortforums.com/forum117/4511.html


]]> <![CDATA[Logic Engine Firmware 7.057 to 7.078]]> https://www.comfortforums.com/thread-4286.html Mon, 27 Jul 2015 12:22:49 -0400 ]]> https://www.comfortforums.com/thread-4286.html
LOG 7.057
Refer to http://www.comfortforums.com/forum79/3815.html

LOG 7.062
Refer to http://www.comfortforums.com/forum79/3996.html


LOG 7.078
Refer to http://www.comfortforums.com/forum79/4163.html
Also Logic Engine is able to Bypass Zones

Bug in 7.078
Control Menu in the Comfort iOS/Android Apps may not work in sending commands
Logic Engine Firmware 7.078 has been withdrawn pending the fix in the next version 7.079




]]>
LOG 7.057
Refer to http://www.comfortforums.com/forum79/3815.html

LOG 7.062
Refer to http://www.comfortforums.com/forum79/3996.html


LOG 7.078
Refer to http://www.comfortforums.com/forum79/4163.html
Also Logic Engine is able to Bypass Zones

Bug in 7.078
Control Menu in the Comfort iOS/Android Apps may not work in sending commands
Logic Engine Firmware 7.078 has been withdrawn pending the fix in the next version 7.079




]]> <![CDATA[Logic Engine Firmware 7.055 (Beta)]]> https://www.comfortforums.com/thread-3791.html Sat, 26 Apr 2014 04:44:07 -0400 ]]> https://www.comfortforums.com/thread-3791.html https://www.cytech.biz/product_details.php?item_id=357


The fixes the bug in Logic 7.050 that caused the control and status on the Comfort apps not to work

See the topic http://www.comfortforums.com/view_topic.php?id=3778&forum_id=79 for common changes with ULT 7053
]]> https://www.cytech.biz/product_details.php?item_id=357


The fixes the bug in Logic 7.050 that caused the control and status on the Comfort apps not to work

See the topic http://www.comfortforums.com/view_topic.php?id=3778&forum_id=79 for common changes with ULT 7053
]]> <![CDATA[Bug in Logic Engine 7.050]]> https://www.comfortforums.com/thread-3788.html Thu, 24 Apr 2014 12:02:46 -0400 ]]> https://www.comfortforums.com/thread-3788.html The control and status for the Comfort apps is not working. Please revert to 7.047 for the time being until the bug is fixed
]]> The control and status for the Comfort apps is not working. Please revert to 7.047 for the time being until the bug is fixed
]]> <![CDATA[Control Menu Status stuck at Wait.]]> https://www.comfortforums.com/thread-3785.html Wed, 23 Apr 2014 16:41:17 -0400 ]]> https://www.comfortforums.com/thread-3785.html I have gotten this to work before with an earlier configurator and comfort logic firmware. This is a rebuild from scratch project so I could have missed out something important?  Any pointers from anyone?]]> I have gotten this to work before with an earlier configurator and comfort logic firmware. This is a rebuild from scratch project so I could have missed out something important?  Any pointers from anyone?]]> <![CDATA[Logic Engine Firmware 7.026]]> https://www.comfortforums.com/thread-3337.html Sat, 06 Apr 2013 01:31:09 -0400 ]]> https://www.comfortforums.com/thread-3337.html Comfigurator 3.6.5 is needed to support the Logic Engine. Do File> New and select Logic Engine to create a Logic engine Template
]]> Comfigurator 3.6.5 is needed to support the Logic Engine. Do File> New and select Logic Engine to create a Logic engine Template
]]> <![CDATA[Logic Engine Introduction]]> https://www.comfortforums.com/thread-3336.html Sat, 06 Apr 2013 01:25:00 -0400 ]]> https://www.comfortforums.com/thread-3336.html This has been replaced by LGX01 http://www.comfortforums.com/forum117/4511.html
----------------------------------------------------------------------------------------------



Cytech\'s new Logic Engine is a Programmable Controller for Automation Applications which can replace PLCs and with the ability to interface to most  Home automation Systems.


Features
  • 8 inputs, 8 open-collector outputs, expandable to 216 Inputs and 216 outputs
  • 12V - 1Amp wall mount adaptor
  • EN01 enclosure 310 x 350 x 95 mm. CM9000-LOG is without EN01
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • able to send 250 IR Codes to AV and airconditioners
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB, RS232, Universal, Z-Wave etc
  • Programmable using UCM with Comfigurator
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic condtitions (If/Then/Else)
  • Interface to RS232, RS485, Ethernet, C-Bus, KNX, Z-Wave, Velbus, GSM etc
  • Interface between 2 systems eg Zwave to KNX etc
  • Hotel Room Bedside Panels using SCS switches
  • iPhone app to control and monitor system
  • Touchscreen control using KT03 monochrome touchscreen
  • Control on/off lighting via two way switches with TWS ( with relay and current sensor)
  • Control airconditioning  and AV equipment via IR signals (250 codes)
Options/Expansions
  • Up to 8  UCMs (RS232, USB, Ethernet, Cbus, KNX, Zwave, Velbus, Universal, GSM)
  • Up to 15 SCS or RIO
  • Expandable to 96 Inputs/outputs using LEM and SEM, and a further 120 I/O using RIO
  • KT03 Monochrome Touchscreen Keypad
This is essentially a Comfort PCB without the alarm, dialer, voice, recording, intercom functions.
Logic Engine Differences with Comfort
  1. It  is NOT an alarm system. Inputs trigger Responses, do not activate alarms.
  2. It is not connected to the phone line and does not auto-answer calls or dial to phones
  3. Does not have  a voice menu or  make announcements
  4. No  Message recording and Playback
  5. No Intercom Functions
  6. No battery charger, does not need backup battery
Part Numbers

  1. CP9000-LOG Logic Engine with EN01 Enclosure 310 x 350 x 95 mm with12V 1 A.
  2. CM9000-LOG Logic Engine PCB only with power supply 12V 1A

Link to Logic Engine on Cytech Website https://www.cytech.biz/cytech_logic_engine.html

Download the brochure from https://www.cytech.biz/logic_engine_brochure.html
]]> This has been replaced by LGX01 http://www.comfortforums.com/forum117/4511.html
----------------------------------------------------------------------------------------------



Cytech\'s new Logic Engine is a Programmable Controller for Automation Applications which can replace PLCs and with the ability to interface to most  Home automation Systems.


Features
  • 8 inputs, 8 open-collector outputs, expandable to 216 Inputs and 216 outputs
  • 12V - 1Amp wall mount adaptor
  • EN01 enclosure 310 x 350 x 95 mm. CM9000-LOG is without EN01
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • able to send 250 IR Codes to AV and airconditioners
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB, RS232, Universal, Z-Wave etc
  • Programmable using UCM with Comfigurator
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic condtitions (If/Then/Else)
  • Interface to RS232, RS485, Ethernet, C-Bus, KNX, Z-Wave, Velbus, GSM etc
  • Interface between 2 systems eg Zwave to KNX etc
  • Hotel Room Bedside Panels using SCS switches
  • iPhone app to control and monitor system
  • Touchscreen control using KT03 monochrome touchscreen
  • Control on/off lighting via two way switches with TWS ( with relay and current sensor)
  • Control airconditioning  and AV equipment via IR signals (250 codes)
Options/Expansions
  • Up to 8  UCMs (RS232, USB, Ethernet, Cbus, KNX, Zwave, Velbus, Universal, GSM)
  • Up to 15 SCS or RIO
  • Expandable to 96 Inputs/outputs using LEM and SEM, and a further 120 I/O using RIO
  • KT03 Monochrome Touchscreen Keypad
This is essentially a Comfort PCB without the alarm, dialer, voice, recording, intercom functions.
Logic Engine Differences with Comfort
  1. It  is NOT an alarm system. Inputs trigger Responses, do not activate alarms.
  2. It is not connected to the phone line and does not auto-answer calls or dial to phones
  3. Does not have  a voice menu or  make announcements
  4. No  Message recording and Playback
  5. No Intercom Functions
  6. No battery charger, does not need backup battery
Part Numbers

  1. CP9000-LOG Logic Engine with EN01 Enclosure 310 x 350 x 95 mm with12V 1 A.
  2. CM9000-LOG Logic Engine PCB only with power supply 12V 1A

Link to Logic Engine on Cytech Website https://www.cytech.biz/cytech_logic_engine.html

Download the brochure from https://www.cytech.biz/logic_engine_brochure.html
]]>