https://www.comfortforums.com/ Fri, 11 Sep 2026 11:35:22 +0000 MyBB https://www.comfortforums.com/thread-5979.html Mon, 15 Jun 2026 14:49:18 -0400 cc_uk]]> https://www.comfortforums.com/thread-5979.html
https://www.cytech.biz/comfort_remote_co...te+control

And also the Temperature Sensor TMS01?]]>
https://www.cytech.biz/comfort_remote_co...te+control

And also the Temperature Sensor TMS01?]]> https://www.comfortforums.com/thread-5866.html Sun, 24 May 2026 12:50:03 -0400 cc_uk]]> https://www.comfortforums.com/thread-5866.html
I am considering upgrading to the newer CM9001-ULT/A  (that's if Laser in the UK can confirm they have the /A variant - as they don't show it as such.

Will a new CM9001-ULT/A fit into the EN03 or is any form of adapter plate needed?   I assume I can move the ETH03 from the UCM to be directly connected tot he controller

I also will need to remove the AC transformer and replace with the switched mode PSU.]]>
I am considering upgrading to the newer CM9001-ULT/A  (that's if Laser in the UK can confirm they have the /A variant - as they don't show it as such.

Will a new CM9001-ULT/A fit into the EN03 or is any form of adapter plate needed?   I assume I can move the ETH03 from the UCM to be directly connected tot he controller

I also will need to remove the AC transformer and replace with the switched mode PSU.]]> https://www.comfortforums.com/thread-5618.html Sat, 15 Mar 2025 13:55:57 -0400 ]]> https://www.comfortforums.com/thread-5618.html
  UCM.jpg (Size: 142.75 KB / Downloads: 19) ]]>
  UCM.jpg (Size: 142.75 KB / Downloads: 19) ]]> https://www.comfortforums.com/thread-5490.html Tue, 28 May 2024 12:03:52 -0400 ]]> https://www.comfortforums.com/thread-5490.html  
I am having a few issues installing a ceiling PIR sensor with my comfort system. 
The device I have is RISC Lunar 150DT3.  
https://docs.rs-online.com/b442/0900766b80825034.pdf 
 
I decided not to use EOL settings (but have tried both) so the wiring should be simple. 
First two terminals plus and minus 
Second two for connection to comfort (labeled alarm) 
 
Its the rest of the connections I dont understand. I just assumed I would not use them or short them if not in use but it seems not. 
 
The problem I have is the device stays active and wont go to inactive. 
Can someone with better knowledge please help and see if they can tell why I am having this issue. 
 
Thank you  
]]>  
I am having a few issues installing a ceiling PIR sensor with my comfort system. 
The device I have is RISC Lunar 150DT3.  
https://docs.rs-online.com/b442/0900766b80825034.pdf 
 
I decided not to use EOL settings (but have tried both) so the wiring should be simple. 
First two terminals plus and minus 
Second two for connection to comfort (labeled alarm) 
 
Its the rest of the connections I dont understand. I just assumed I would not use them or short them if not in use but it seems not. 
 
The problem I have is the device stays active and wont go to inactive. 
Can someone with better knowledge please help and see if they can tell why I am having this issue. 
 
Thank you  
]]> https://www.comfortforums.com/thread-5463.html Mon, 08 Jan 2024 17:05:07 -0500 ]]> https://www.comfortforums.com/thread-5463.html
Clearly it was a good thing that I was at home, but how do I prevent this from happening, especially if we are not home, the would have been no way to stop the siren.
Am using Comfort Ultra 7.201 with two slaves (7.207)]]>
Clearly it was a good thing that I was at home, but how do I prevent this from happening, especially if we are not home, the would have been no way to stop the siren.
Am using Comfort Ultra 7.201 with two slaves (7.207)]]> https://www.comfortforums.com/thread-5450.html Wed, 25 Oct 2023 07:55:37 -0400 ]]> https://www.comfortforums.com/thread-5450.html
When was Comfort 2 introduced and how to determine if a PCB is Comfort 1 or 2?

Thanks]]>
When was Comfort 2 introduced and how to determine if a PCB is Comfort 1 or 2?

Thanks]]> https://www.comfortforums.com/thread-5415.html Fri, 20 Jan 2023 18:40:20 -0500 ]]> https://www.comfortforums.com/thread-5415.html What\'s the best way to connect the infrared transmitter IR03W to a Comfort output since  this transmitter has an 3.5mm audio plug?
I know I can cut the IR03W wire and plug the two wires to to the output but  I\'m just wondering if there is a more elegant solution.
But even if I have to cut the wire can I do the connection to the Comfort Output without having to consider any polarity?
Sorry but I\'m know nothing about leds and I don\'t want to damage the IR transmitter.

ThanksEurico
]]> What\'s the best way to connect the infrared transmitter IR03W to a Comfort output since  this transmitter has an 3.5mm audio plug?
I know I can cut the IR03W wire and plug the two wires to to the output but  I\'m just wondering if there is a more elegant solution.
But even if I have to cut the wire can I do the connection to the Comfort Output without having to consider any polarity?
Sorry but I\'m know nothing about leds and I don\'t want to damage the IR transmitter.

ThanksEurico
]]> https://www.comfortforums.com/thread-5372.html Fri, 11 Mar 2022 05:12:24 -0500 ]]> https://www.comfortforums.com/thread-5372.html Can anyone help me with how to wire this bell box to the Comfort Alarm? (Manual extract below)



  Alarm Panel.PNG (Size: 187.72 KB / Downloads: 18) ]]> Can anyone help me with how to wire this bell box to the Comfort Alarm? (Manual extract below)



  Alarm Panel.PNG (Size: 187.72 KB / Downloads: 18) ]]> https://www.comfortforums.com/thread-5326.html Tue, 17 Aug 2021 06:49:09 -0400 ]]> https://www.comfortforums.com/thread-5326.html BBC News story

I know Comfort has a GSM backup option (although mine still has bugs/issues during AC power failures - but that\'s another thread) but will there be any new modules or way of Comfort still working over VOIP landlines in four years time?  Or is there already a way to support this?

]]> BBC News story

I know Comfort has a GSM backup option (although mine still has bugs/issues during AC power failures - but that\'s another thread) but will there be any new modules or way of Comfort still working over VOIP landlines in four years time?  Or is there already a way to support this?

]]> https://www.comfortforums.com/thread-5237.html Sat, 17 Oct 2020 14:49:43 -0400 ]]> https://www.comfortforums.com/thread-5237.html Many thanks,Tas]]> Many thanks,Tas]]> https://www.comfortforums.com/thread-5236.html Sat, 17 Oct 2020 04:56:57 -0400 ]]> https://www.comfortforums.com/thread-5236.html
Does anyone know the precise screw type for the screw down type of main Comfort panel? I have some M3s but they don\'t fit - seems to be different thread. I am now missing two. (Looks like the attached)

Thanks

  IMG_2930.jpeg (Size: 43 KB / Downloads: 15) ]]>
Does anyone know the precise screw type for the screw down type of main Comfort panel? I have some M3s but they don\'t fit - seems to be different thread. I am now missing two. (Looks like the attached)

Thanks

  IMG_2930.jpeg (Size: 43 KB / Downloads: 15) ]]> https://www.comfortforums.com/thread-5212.html Thu, 27 Aug 2020 15:31:19 -0400 ]]> https://www.comfortforums.com/thread-5212.html Just checking, is there any way I can tap off a low level audio output from the PCB? The current audio output for alarms is amplified and ideally I\'d like to tap off an RCA level feed that I can mix with others before piping to a set of ceiling speakers. (Ideally I\'d like to avoid a conversion high level to low level and tap off the main board)Same question from a slave board which happens to be nearer... 
Thanks! ]]> Just checking, is there any way I can tap off a low level audio output from the PCB? The current audio output for alarms is amplified and ideally I\'d like to tap off an RCA level feed that I can mix with others before piping to a set of ceiling speakers. (Ideally I\'d like to avoid a conversion high level to low level and tap off the main board)Same question from a slave board which happens to be nearer... 
Thanks! ]]> https://www.comfortforums.com/thread-5184.html Sat, 30 May 2020 20:34:29 -0400 ]]> https://www.comfortforums.com/thread-5184.html One of the \"things\" I had on Comfort I was that I could hear back (as an echo) any digit I pressed on my mobile.This was very helpful specially when the communication was not very good and some digits failed to reach Comfort - I could hear them missing and repeat the digit.
Now, with Comfort II, currently when I call-in and insert the digits on the mobile I do not have a feedback, so for instance for the sign-in code I only know it in the end that some digit was wrong or missed, but then I cannot correct what I cannot \"see\". This is frustrating and looks like lottery trying to sign-in remotely.
NOTE: I am using the same mobile phone for the last two years, so no difference in that end.
Is there any \"tuning\" on Comfort communication that can give me back the feedback of digits pressed? ]]> One of the \"things\" I had on Comfort I was that I could hear back (as an echo) any digit I pressed on my mobile.This was very helpful specially when the communication was not very good and some digits failed to reach Comfort - I could hear them missing and repeat the digit.
Now, with Comfort II, currently when I call-in and insert the digits on the mobile I do not have a feedback, so for instance for the sign-in code I only know it in the end that some digit was wrong or missed, but then I cannot correct what I cannot \"see\". This is frustrating and looks like lottery trying to sign-in remotely.
NOTE: I am using the same mobile phone for the last two years, so no difference in that end.
Is there any \"tuning\" on Comfort communication that can give me back the feedback of digits pressed? ]]> https://www.comfortforums.com/thread-5179.html Sat, 16 May 2020 17:04:26 -0400 ]]> https://www.comfortforums.com/thread-5179.html I\'ve an original Comfort 1 system with X10 (that are DIN rail modules)… to cut a long story short the X10 modules as I\'m sure you\'ll know go a bit dicky every now and then, so I just used to replace them... BUT it looks like they\'re now getting harder to find, and, newer systems have taken over.
I installed the system back in 2001, so it\'s done pretty well to be fair and now I\'ve got multiple X10 modules down and in conjunction with the original board limiting me to X10 and other elements such as not being able to use the newer (better looking) keypads I\'ve decided it\'s probably best to start over.
It looks like the new Comfort has separated the logic controller out, and that the controller can do multiple formats... does anyone have experience of these formats and especially anything that\'ll fit in a DIN rail box with connections that mirror the X10 modules?
Any pointers would be helpful... I\'ve not really kept up to date on this.
Regards,
RicTS]]> I\'ve an original Comfort 1 system with X10 (that are DIN rail modules)… to cut a long story short the X10 modules as I\'m sure you\'ll know go a bit dicky every now and then, so I just used to replace them... BUT it looks like they\'re now getting harder to find, and, newer systems have taken over.
I installed the system back in 2001, so it\'s done pretty well to be fair and now I\'ve got multiple X10 modules down and in conjunction with the original board limiting me to X10 and other elements such as not being able to use the newer (better looking) keypads I\'ve decided it\'s probably best to start over.
It looks like the new Comfort has separated the logic controller out, and that the controller can do multiple formats... does anyone have experience of these formats and especially anything that\'ll fit in a DIN rail box with connections that mirror the X10 modules?
Any pointers would be helpful... I\'ve not really kept up to date on this.
Regards,
RicTS]]> https://www.comfortforums.com/thread-5165.html Mon, 27 Apr 2020 04:18:47 -0400 ]]> https://www.comfortforums.com/thread-5165.html ]]> ]]>