https://www.comfortforums.com/ Sun, 09 Aug 2026 01:50:23 +0000 MyBB https://www.comfortforums.com/thread-5660.html Wed, 27 Aug 2025 10:16:48 -0400 Sota]]> https://www.comfortforums.com/thread-5660.html
  Comfigurator.png (Size: 113.36 KB / Downloads: 13) ]]>
  Comfigurator.png (Size: 113.36 KB / Downloads: 13) ]]> https://www.comfortforums.com/thread-5637.html Mon, 26 May 2025 12:10:46 -0400 ]]> https://www.comfortforums.com/thread-5637.html https://www.comfortforums.com/thread-5512.html Mon, 09 Sep 2024 05:02:57 -0400 ]]> https://www.comfortforums.com/thread-5512.html RIO Input and have setup on/off responses  (SCS/RIO).

I have a need to use this input as an alarm input, and I cannot physically wire this, so I thought of using one of the alarm inputs as a virtual input.

What would be the ideal way of doing this?

1.  Change the input from RIO Input to Virtual Input on the ISM07? Would I still need to flag the alarm input as virtual?
2. Add actions (Virtual Input on and off) to the existing responses and set the flag of the alarm input as virtual?

Setup:

• Comfort Model: CM9001-ULT
• Comfort Version 8.005
• ScsRio (IRIO) Version 7.024

]]> RIO Input and have setup on/off responses  (SCS/RIO).

I have a need to use this input as an alarm input, and I cannot physically wire this, so I thought of using one of the alarm inputs as a virtual input.

What would be the ideal way of doing this?

1.  Change the input from RIO Input to Virtual Input on the ISM07? Would I still need to flag the alarm input as virtual?
2. Add actions (Virtual Input on and off) to the existing responses and set the flag of the alarm input as virtual?

Setup:

• Comfort Model: CM9001-ULT
• Comfort Version 8.005
• ScsRio (IRIO) Version 7.024

]]> https://www.comfortforums.com/thread-5375.html Sat, 12 Mar 2022 22:05:54 -0500 ]]> https://www.comfortforums.com/thread-5375.html I find that, quite often, Comfigurator loses the Double EOL setting and reverts all zones back to \"No EOL\", which is a problem if I don\'t notice it\'s done this, and upload the configuration, only for the system to erupt with Tamper alerts.
I\'ve not yet worked out what sequence of usage causes this.
Cheers,
Keith]]> I find that, quite often, Comfigurator loses the Double EOL setting and reverts all zones back to \"No EOL\", which is a problem if I don\'t notice it\'s done this, and upload the configuration, only for the system to erupt with Tamper alerts.
I\'ve not yet worked out what sequence of usage causes this.
Cheers,
Keith]]> https://www.comfortforums.com/thread-5355.html Fri, 17 Dec 2021 11:37:24 -0500 ]]> https://www.comfortforums.com/thread-5355.html Unfortunately, since then, it seems that contact with the CBUS UCM has been lost - there is no comms between Comfort and CBUS.  To try and resolve that I reloaded the latest CCL file (using Comfigurator 2.2.3), with no difference.
I have tried resetting the CBUS UCM and, again, no difference.
So, basically, I am looking for some inspiration on what to try next.
Here\'s hoping!
Thanks,
Nick]]> Unfortunately, since then, it seems that contact with the CBUS UCM has been lost - there is no comms between Comfort and CBUS.  To try and resolve that I reloaded the latest CCL file (using Comfigurator 2.2.3), with no difference.
I have tried resetting the CBUS UCM and, again, no difference.
So, basically, I am looking for some inspiration on what to try next.
Here\'s hoping!
Thanks,
Nick]]> https://www.comfortforums.com/thread-5253.html Tue, 01 Dec 2020 12:50:45 -0500 ]]> https://www.comfortforums.com/thread-5253.html Currently each keypad arms and disarms the individual partitions.
I\'m looking for the SIMPLEST way to be able to make this a single arm /disarm from any keypad.
Preferably add a flag so that we can go from single whole house arm to three separate partitions within the program ( rather than having to use a separate program to \'swap\' over).
I think ive dont it in partition events but just dont believe it will work !]]> Currently each keypad arms and disarms the individual partitions.
I\'m looking for the SIMPLEST way to be able to make this a single arm /disarm from any keypad.
Preferably add a flag so that we can go from single whole house arm to three separate partitions within the program ( rather than having to use a separate program to \'swap\' over).
I think ive dont it in partition events but just dont believe it will work !]]> https://www.comfortforums.com/thread-5186.html Wed, 17 Jun 2020 07:03:54 -0400 ]]> https://www.comfortforums.com/thread-5186.html
I\'ve done some tests and what I\'ve seen is  that when you trip this Entry Time zone and entry time ends no alert occurs, even you don\'t trip any other zone, directly the Intruder alarm triggers, despite being an alert zone.
If you change the Entry Door feature to \"NO\" the alert works fine, This is, no Intruder alarm is triggerered until there is no other zone. But if you put the entry door feature, the alarm triggers when the Entrytime ends, despite no other zones triggered.
How can we join an Alert with a Entry Door  feature?
Thank you
]]>
I\'ve done some tests and what I\'ve seen is  that when you trip this Entry Time zone and entry time ends no alert occurs, even you don\'t trip any other zone, directly the Intruder alarm triggers, despite being an alert zone.
If you change the Entry Door feature to \"NO\" the alert works fine, This is, no Intruder alarm is triggerered until there is no other zone. But if you put the entry door feature, the alarm triggers when the Entrytime ends, despite no other zones triggered.
How can we join an Alert with a Entry Door  feature?
Thank you
]]> https://www.comfortforums.com/thread-5031.html Fri, 15 Mar 2019 02:59:32 -0400 ]]> https://www.comfortforums.com/thread-5031.html
https://www.cytech.biz/kp05a_keypad_lcd_horizontal.html
]]>
https://www.cytech.biz/kp05a_keypad_lcd_horizontal.html
]]> https://www.comfortforums.com/thread-5023.html Sun, 10 Feb 2019 10:03:30 -0500 ]]> https://www.comfortforums.com/thread-5023.html Would it be possible to add a timer change function to the timer list. 
If there is a timer list with the ability to alter the timers then this list could (usefully) then be available in user mode.
]]> Would it be possible to add a timer change function to the timer list. 
If there is a timer list with the ability to alter the timers then this list could (usefully) then be available in user mode.
]]> https://www.comfortforums.com/thread-5022.html Sun, 10 Feb 2019 08:43:50 -0500 ]]> https://www.comfortforums.com/thread-5022.html Can we add to the wish list that the responses screen remains at the last used position after a save or alteration or jump to another window.
Thanks

]]> Can we add to the wish list that the responses screen remains at the last used position after a save or alteration or jump to another window.
Thanks

]]> https://www.comfortforums.com/thread-5021.html Sun, 10 Feb 2019 05:56:55 -0500 ]]> https://www.comfortforums.com/thread-5021.html Is there a reason why the flag table cannot have a response associated with it?

]]> Is there a reason why the flag table cannot have a response associated with it?

]]> https://www.comfortforums.com/thread-5016.html Thu, 31 Jan 2019 15:31:18 -0500 111rdw]]> https://www.comfortforums.com/thread-5016.html https://www.comfortforums.com/thread-5014.html Wed, 30 Jan 2019 16:25:25 -0500 111rdw]]> https://www.comfortforums.com/thread-5014.html
I’m an end user who has just successfully installed a system. I’m slowly getting my heat around programming it. My question, is it normal for the siren to chirp for about a second when away mode is set. And can you program it out?]]>
I’m an end user who has just successfully installed a system. I’m slowly getting my heat around programming it. My question, is it normal for the siren to chirp for about a second when away mode is set. And can you program it out?]]> https://www.comfortforums.com/thread-4996.html Fri, 04 Jan 2019 11:07:51 -0500 ]]> https://www.comfortforums.com/thread-4996.html
please tell me, how can I change the day and hour in the keypad screen? I have try to check all the options throu the keypad and I can not find the way. The keypad it\'s the KP04 model.



My best regards,
Miguel]]>
please tell me, how can I change the day and hour in the keypad screen? I have try to check all the options throu the keypad and I can not find the way. The keypad it\'s the KP04 model.



My best regards,
Miguel]]> https://www.comfortforums.com/thread-4953.html Thu, 30 Aug 2018 05:24:25 -0400 ]]> https://www.comfortforums.com/thread-4953.html Many thanks for your help previously with my RS485 issue. Issue is now resolved per your advice and Gary Morgan. System working well. I am planing going to Economy 10 electricity tariff.  This gives 10 hours of cheaper electricity during the day - there are 3 periods . However the meter is timed with  UTC time and does not change with Summer Time changes.
Via MOD BUS TCP interface with the Victron solar battery inverter and charger I want to control when the battery is charged (if not enough solar) so that the Grid charges the battery during the cheaper periods and then discharges during the more expensive time periods.
I have tested the Comfort MODBUS TCP interface with the Victron unit and this works.
The issue is how to manage UTC. I do not want switch off the time synching via ETH03 as this set all my time programs for Heatmiser and DHW etc.
How would you go about setting up time programs in this case?
The Time period below are UTC.

1. Three off-peak hours in the afternoon (e.g. 1pm – 4pm)Two in the evening (e.g. 8pm – 10pm)Five overnight (e.g. midnight – 5am)

Best wishes
Mark]]> Many thanks for your help previously with my RS485 issue. Issue is now resolved per your advice and Gary Morgan. System working well. I am planing going to Economy 10 electricity tariff.  This gives 10 hours of cheaper electricity during the day - there are 3 periods . However the meter is timed with  UTC time and does not change with Summer Time changes.
Via MOD BUS TCP interface with the Victron solar battery inverter and charger I want to control when the battery is charged (if not enough solar) so that the Grid charges the battery during the cheaper periods and then discharges during the more expensive time periods.
I have tested the Comfort MODBUS TCP interface with the Victron unit and this works.
The issue is how to manage UTC. I do not want switch off the time synching via ETH03 as this set all my time programs for Heatmiser and DHW etc.
How would you go about setting up time programs in this case?
The Time period below are UTC.

1. Three off-peak hours in the afternoon (e.g. 1pm – 4pm)Two in the evening (e.g. 8pm – 10pm)Five overnight (e.g. midnight – 5am)

Best wishes
Mark]]>