https://www.comfortforums.com/ Fri, 11 Sep 2026 11:35:01 +0000 MyBB https://www.comfortforums.com/thread-5085.html Sat, 20 Jul 2019 04:47:20 -0400 ]]> https://www.comfortforums.com/thread-5085.html Velbus 7.117

• Improved Monitor Mode
• Improved Status at bottom left so that any error remains displayed
• New Velbus types are supported using a table so new Velbus types can be added easily
• Send Time to velbus fixed Bug
  

]]> Velbus 7.117

• Improved Monitor Mode
• Improved Status at bottom left so that any error remains displayed
• New Velbus types are supported using a table so new Velbus types can be added easily
• Send Time to velbus fixed Bug
  

]]> https://www.comfortforums.com/thread-4226.html Thu, 04 Jun 2015 05:09:02 -0400 ]]> https://www.comfortforums.com/thread-4226.html ]]> ]]> https://www.comfortforums.com/thread-4085.html Fri, 19 Dec 2014 12:06:36 -0500 ]]> https://www.comfortforums.com/thread-4085.html Known Bugs

• Sensor register mapped to Velbus was not updated. Fixed in 7.070

New Features

Added support for VMB1BLE and VMB2BLE commands in Response Wizard

Please use Comfigurator 3.9.7 which supports the new commands for the VMB1BLE and VMB2BLE

Download the Velbus 7.062 Beta Firmware from https://www.cytech.biz/ucmvelbus_firmware.html


]]> Known Bugs

• Sensor register mapped to Velbus was not updated. Fixed in 7.070

New Features

Added support for VMB1BLE and VMB2BLE commands in Response Wizard

Please use Comfigurator 3.9.7 which supports the new commands for the VMB1BLE and VMB2BLE

Download the Velbus 7.062 Beta Firmware from https://www.cytech.biz/ucmvelbus_firmware.html


]]> https://www.comfortforums.com/thread-3934.html Sat, 23 Aug 2014 08:46:34 -0400 ]]> https://www.comfortforums.com/thread-3934.html

1. Allows unsupported modules to be detected during learn (even though no functions ae available)
2. Fixed bug VMB4RYNO On/off did not update the counter

The firmware can be downloaded from VMB4RYNO

]]>

1. Allows unsupported modules to be detected during learn (even though no functions ae available)
2. Fixed bug VMB4RYNO On/off did not update the counter

The firmware can be downloaded from VMB4RYNO

]]> https://www.comfortforums.com/thread-3625.html Wed, 27 Nov 2013 07:23:34 -0500 ]]> https://www.comfortforums.com/thread-3625.html ]]> ]]> https://www.comfortforums.com/thread-3264.html Thu, 24 Jan 2013 00:27:38 -0500 ]]> https://www.comfortforums.com/thread-3264.html Known Bugs

1. If Send Date and Time to Velbus is checked and VMB4PD or VMB1TC is in the Velbus to Comfort tab then the UCM/Velbus will reset every 5 seconds
   

Changes

1. UCM/Velbus ID can be changed by using COPY Button Press and Hold. The LEDs show the binary ID codes when Copy button is pressed. ID can be changed using Comfigurator 3.6 drag and drop
2. UCM/Velbus Module Status is  displayed on the status bar which is very useful for testing and troubleshooting. The possible status information includes;  \"Normal/No error\" “EEPROM missing/faulty\" \"EEPROM insufficient capacity” \"EEPROM data invalid\" \"Communication error between UCM baseboard and sub-module\"
3. New Velbus Modules are supported
4. Write and Read from EEPROM is faster

Comfigurator 3.6.4 is required to support the new features, see forum at http://www.comfortforums.com/view_topic.php?id=3261&forum_id=20
Comfort firmware Version 7 and UCM/USB or ETH02 firmware version 7 are also required. Firmware can be upgraded using Comfiguratoro 3.6.4 in Modules Tab, riught click on module and select \"Check for Updates\"

The revised UCM/Velbus Manual can be downloaded from https://www.cytech.biz/ucmvelbus_manual....ory_id=107



]]> Known Bugs

1. If Send Date and Time to Velbus is checked and VMB4PD or VMB1TC is in the Velbus to Comfort tab then the UCM/Velbus will reset every 5 seconds
   

Changes

1. UCM/Velbus ID can be changed by using COPY Button Press and Hold. The LEDs show the binary ID codes when Copy button is pressed. ID can be changed using Comfigurator 3.6 drag and drop
2. UCM/Velbus Module Status is  displayed on the status bar which is very useful for testing and troubleshooting. The possible status information includes;  \"Normal/No error\" “EEPROM missing/faulty\" \"EEPROM insufficient capacity” \"EEPROM data invalid\" \"Communication error between UCM baseboard and sub-module\"
3. New Velbus Modules are supported
4. Write and Read from EEPROM is faster

Comfigurator 3.6.4 is required to support the new features, see forum at http://www.comfortforums.com/view_topic.php?id=3261&forum_id=20
Comfort firmware Version 7 and UCM/USB or ETH02 firmware version 7 are also required. Firmware can be upgraded using Comfiguratoro 3.6.4 in Modules Tab, riught click on module and select \"Check for Updates\"

The revised UCM/Velbus Manual can be downloaded from https://www.cytech.biz/ucmvelbus_manual....ory_id=107



]]> https://www.comfortforums.com/thread-2565.html Sun, 06 Nov 2011 01:06:10 -0400 ]]> https://www.comfortforums.com/thread-2565.html No other functional changes
Please download from https://www.cytech.biz/product_details.php?item_id=234

Known Issues

If an Unknown velbus module is the 1st Velbus address, the Learn process will not detect any modules. Set the address of the Unknown module to a higher velbus address to work around this issue
]]> No other functional changes
Please download from https://www.cytech.biz/product_details.php?item_id=234

Known Issues

If an Unknown velbus module is the 1st Velbus address, the Learn process will not detect any modules. Set the address of the Unknown module to a higher velbus address to work around this issue
]]> https://www.comfortforums.com/thread-2304.html Tue, 14 Jun 2011 22:54:37 -0400 ]]> https://www.comfortforums.com/thread-2304.html Supports new Modules

• VMB1TC - Temperature Controller
• VMB1LED - Professional LED Dimmer Module
• VMB4RYLD - Programmable 4 channel Voltage Out Relay Module
• VMBRYNO - Programmable 4 channel Relay Module
• VMB4DC - 4 channel 0 (1) to 10V Output Controller
• VMB4DME - Dimmer for Electronic/ Resistive Load

Comfigurator 3.2.8 is required
Minimum Comfort Firmware 5.215 Recommended
Minimum UCM Firmware 5.212

Please download UCM/Velbus firmware from
https://www.cytech.biz/ucmvelbus_firmware.html
]]> Supports new Modules

• VMB1TC - Temperature Controller
• VMB1LED - Professional LED Dimmer Module
• VMB4RYLD - Programmable 4 channel Voltage Out Relay Module
• VMBRYNO - Programmable 4 channel Relay Module
• VMB4DC - 4 channel 0 (1) to 10V Output Controller
• VMB4DME - Dimmer for Electronic/ Resistive Load

Comfigurator 3.2.8 is required
Minimum Comfort Firmware 5.215 Recommended
Minimum UCM Firmware 5.212

Please download UCM/Velbus firmware from
https://www.cytech.biz/ucmvelbus_firmware.html
]]> https://www.comfortforums.com/thread-2005.html Mon, 11 Oct 2010 09:07:48 -0400 ]]> https://www.comfortforums.com/thread-2005.html https://www.cytech.biz/ucmvelbus_firmware.html

This fixed a big in the value of temperature received from Velbus VMB1TS

Please use the new Comfigurator 3.2.4
]]> https://www.cytech.biz/ucmvelbus_firmware.html

This fixed a big in the value of temperature received from Velbus VMB1TS

Please use the new Comfigurator 3.2.4
]]> https://www.comfortforums.com/thread-1967.html Fri, 20 Aug 2010 22:24:21 -0400 ]]> https://www.comfortforums.com/thread-1967.html This version allows 512 velbus channels to be learned compared to the earlier firmware which was limited to 256 channels. In the older version if a larger Vebus network with more than 256 channels the network cannot be learned successfully and the velbus addresses must be entered manually

Comfigurator 3.2.2 is required to handle more than 256 channels, see http://www.comfortforums.com/forum20/1964.html

However this version of Comfigurator is limited to 330 channels due to a bug. The next Comfigurator version will handle 512 channels


Known Issues

1. The value of temperature received from the VMB1TS temp sensor is wrong

[color=\"#ff0000\"]This has now been fixed in Velbus 5.220[/color]


  VELBUS5_219.zip (Size: 14.01 KB / Downloads: 9) ]]> This version allows 512 velbus channels to be learned compared to the earlier firmware which was limited to 256 channels. In the older version if a larger Vebus network with more than 256 channels the network cannot be learned successfully and the velbus addresses must be entered manually

Comfigurator 3.2.2 is required to handle more than 256 channels, see http://www.comfortforums.com/forum20/1964.html

However this version of Comfigurator is limited to 330 channels due to a bug. The next Comfigurator version will handle 512 channels


Known Issues

1. The value of temperature received from the VMB1TS temp sensor is wrong

[color=\"#ff0000\"]This has now been fixed in Velbus 5.220[/color]


  VELBUS5_219.zip (Size: 14.01 KB / Downloads: 9) ]]> https://www.comfortforums.com/thread-1877.html Wed, 09 Jun 2010 02:44:28 -0400 ]]> https://www.comfortforums.com/thread-1877.html
Use Comfigurator 3.2.1 or above


  Velbus5_210.zip (Size: 13.84 KB / Downloads: 1) ]]>
Use Comfigurator 3.2.1 or above


  Velbus5_210.zip (Size: 13.84 KB / Downloads: 1) ]]> https://www.comfortforums.com/thread-1842.html Tue, 04 May 2010 04:46:42 -0400 ]]> https://www.comfortforums.com/thread-1842.html http://www.comfortforums.com/view_topic.php?id=1838&forum_id=20&jump_to=7305#p7305. This supports velbus and fixes some bugs found in the last version

The new UCM/Velbus firmware 5.209 is also available for testing, the cbf attached can be used for upgrading UCM/Velbus by means of UCM/232 or UCMm/USB

This allows Counter values to be unchanged when re-learning Velbus Modules


  Velbus5_209.zip (Size: 13.34 KB / Downloads: 5) ]]> http://www.comfortforums.com/view_topic.php?id=1838&forum_id=20&jump_to=7305#p7305. This supports velbus and fixes some bugs found in the last version

The new UCM/Velbus firmware 5.209 is also available for testing, the cbf attached can be used for upgrading UCM/Velbus by means of UCM/232 or UCMm/USB

This allows Counter values to be unchanged when re-learning Velbus Modules


  Velbus5_209.zip (Size: 13.34 KB / Downloads: 5) ]]>