Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Upgrading Firmware on ETH03 Submodule
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday May 25th, 2014 07:50 am
   PM  Quote  Reply 
1st Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3494
Status: 
Offline

  back to top

The ETH03 firmware is NOT the same as the UCM firmware of the baseboard. The ETH03 firmware runs on the ETH03 submodule module and not the UCM. 

The UCM Firmware is the firmware on the UCM Baseboard (marked by UCM 7.xxx label). UCM Firmware is upgraded by right clicking on the UCM in Modules and selecting "Check for Upgrades" see http://www.comfortforums.com/forum92/3400.html

ETH03 Firmware runs on the ETH03 submodule,

The 'Upgrade' button is used to upgrade the ETH03 firmware on the submodule  over the network. Firmware upgrades are available from the Cytech Technology website at  http://www.cytech.biz/eth03_firmware.html
There are 3 zipped .hex files available
ETH03-General.hex is for UCM/ETH03
ETH03-client.hex is for UCM/Universal
ETH03-heatmiser is for UCM/Heatmiser (wifi)
After downloading the zip file and unzipping, select the ETH03-General firmware (.hex file).
It is advisable to check the website for the latest ETH03 firmware and upgrade the firmware before use.

In Comfigurator, go to Options > Settings >  UCM Connections
Select UCM Interface= Network (Local)



Click on the link for Comfort Server Manager (in blue)



Note the ETH03 firmware version is in the window as highlighted (ETH03GE2.23)
(The CS Manager Software is on the bottom (Version 2.1.0). To Upgrade CS Manager software see http://www.comfortforums.com/forum113/3821.html )



Click on the Upgrade Button to upgrade ETH03 firmware
Browse to the folder containing the firmware hex file, eg ETH03General 1.12.hex




Press OK to start the upgrade


The progress of the upgrade is seen in the progress bar on the bottom right. The process may take less than a minute, and the status "Success" should be seen

The IP address of the UCM/ETH03 will be blank after the upgrade. Press Refresh to detect the IP address and the new firmware should be shown


Last edited on Sunday Feb 11th, 2018 09:42 am by



 Posted: Sunday Oct 26th, 2014 02:44 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4953
Status: 
Offline

  back to top

Please upgrade the UCM firmware to 7.060 or above before upgrading ETH03 firmware to 2.14 or above
If ETH03 firmware is 2.14 and you are not able to connect to the UCM/ETH03, please downgrade ETH03 firmware to 2.01. This should allow you to connect to the UCM/ETH03. Upgrade UCM firmware to 7.060 (or above) then upgrade the ETH03 to 2.14 (or above)



 Posted: Tuesday Mar 31st, 2015 07:25 pm
   PM  Quote  Reply 
3rd Post
Julian.Driver
Member
 

Joined: Tuesday Aug 26th, 2008
Location:  
Posts: 72
Status: 
Offline

  back to top

I have CSM 2.0.6 which will not connect upon refresh, and doesn't have a refresh button! I cn find Comfort on the network very easily with other tools. UCM07 is v 7.028, comfort v 7.057, configurator 3.9.7.0. Is ther a version mismatch here?

Attachment: Capture.JPG (Downloaded 102 times)



 Posted: Wednesday Apr 1st, 2015 06:40 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4953
Status: 
Offline

  back to top

See the possible causes of this here
UCM/ETH03 cannot be seen in Comfort Server Manager
http://www.comfortforums.com/forum113/3823.html



 Posted: Friday Apr 1st, 2016 01:20 pm
   PM  Quote  Reply 
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4953
Status: 
Offline

  back to top

if ETH03 cannot be seen in CS Manager, you can upgrade the ETH03 firmware using the method described here http://www.comfortforums.com/view_topic.php?id=4426&forum_id=113



 Current time is 07:08 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems