KP06 Firmware 6.004 - Printable Version +- Comfort Automation/ Security System Forums (https://www.comfortforums.com) +-- Forum: Products (https://www.comfortforums.com/forum-3.html) +--- Forum: KP06/KP06A/KP04A Keypads (https://www.comfortforums.com/forum-105.html) +---- Forum: KP06A/KP04A Firmware (https://www.comfortforums.com/forum-114.html) +---- Thread: KP06 Firmware 6.004 (/thread-3195.html)

- ident - 12-07-2012 Need engineer code to access Setting menu so that users cannot accidentally change the ID and cause a communications Failure \"Factory default\" option is incorporated into Setting menu. No longer triggered by holding * key for 6 secs. The latest KP06 Firmware can be downloaded from https://www.cytech.biz/kp06_firmware.html?category_id=101 - slychiu - 12-13-2012 Known Bugs If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware