[color=\"#ff5500\"]The KT01 has been replaced by the KT03 which is a lower cost and more powerful replacement, see http://www.comfortforums.com/forum90/
[/color]
[font=\"Verdana, sans-serif\"][size=\"2\"]The KT01 is a touchscreen interface for Comfort. It has a backlit monochrome LCD which acts as a keypad and is able to display zone and alarm information from Comfort. It includes a speaker and microphone to record and announce voice messages, as well as an infrared receiver to activate any Response in a similar to KP02 and KP04. The LCD display can be set to rotate 180 to allow for the choice of the user to have the IR receiver positioned above or below the LCD. The graphics and icons can be customised to indicate lighting, airconditioning, heating, Audio-Visual equipment or any home appliance. Each button or icon can be programmed to activate any Response in Comfort, and can also show the real time status of the device.[/size][/font][size=\"2\"]
[/size]
[color=\"red\"]
[/color][color=\"red\"]Serial Communication firmware version 2.23.0 (available from https://www.cytech.biz/software.html) supports PICED configuration software.
[color=\"black\"] Download the KT01 manual from https://www.cytech.biz/manuals.html
Download the KT01 sample coonfiguration from https://www.cytech.biz/software.html
[/color][/color]
[/color]
[font=\"Verdana, sans-serif\"][size=\"2\"]The KT01 is a touchscreen interface for Comfort. It has a backlit monochrome LCD which acts as a keypad and is able to display zone and alarm information from Comfort. It includes a speaker and microphone to record and announce voice messages, as well as an infrared receiver to activate any Response in a similar to KP02 and KP04. The LCD display can be set to rotate 180 to allow for the choice of the user to have the IR receiver positioned above or below the LCD. The graphics and icons can be customised to indicate lighting, airconditioning, heating, Audio-Visual equipment or any home appliance. Each button or icon can be programmed to activate any Response in Comfort, and can also show the real time status of the device.[/size][/font][size=\"2\"]
[/size]
[color=\"red\"]
[/color][color=\"red\"]Serial Communication firmware version 2.23.0 (available from https://www.cytech.biz/software.html) supports PICED configuration software.
[color=\"black\"] Download the KT01 manual from https://www.cytech.biz/manuals.html
Download the KT01 sample coonfiguration from https://www.cytech.biz/software.html
[/color][/color]