example about using comfort

[hasan hadi]

[user=86]ident[/user] wrote:

The UCM, SEM, Door station, Keypad and RIO/SCS have their own ID addresss
Do UCM ID 1 is not the same as Keypad ID1, or SEM ID1 or door station ID 1 etc

UCM ID is 1 to 8, Keypad ID is 1 to 15. They are separate Ids

Sir you mean if connected 8 UCM and 15 RIO and 5 SEM  to main board across RS485 then all board have ID but all  board have Limited ID because only using sw to adjust ID nowthen (8UCM+15RIO +5 SEM=28 ID  please can be give me wring to connected complete system .
thank you  for all support and good information

[ident]

The system can have 15 keypads, 15 SCS/RIO, 5 SEM, 3 Dooor stations, 8 UCMs
each with their own id
Each device eg has their own ID
If you follow the instructions on seting the ID of each device you will not have any problem

as I sais the ID for each type of module is separate from other modules

[hasan hadi]

[user=86]ident[/user] wrote:

The system can have 15 keypads, 15 SCS/RIO, 5 SEM, 3 Dooor stations, 8 UCMs
each with their own id
Each device eg has their own ID
If you follow the instructions on seting the ID of each device you will not have any problem

as I sais the ID for each type of module is separate from other modules

Hi,
now clear for Id 
now i need wring for complete system include (([highlight= rgb(254, 251, 232);]15 keypads, 15 SCS/RIO, 5 SEM, 3 Door stations, 8 UCMs)) [/highlight]
Regards 

[ident]

Please download

Hookup diagram
https://www.cytech.biz/hookup_diagram.ht...ory_id=106

Comfort wiring guide
https://www.cytech.biz/comfort_wiring_gu...gory_id=99