02-16-2009, 01:17 PM
Pages: 1 2
02-16-2009, 02:56 PM
Yup.
1. I connect all modules and start programming. \'Download complete\' indication on PC
2. When I reach kp, it shows the error, \'press *1 to synchronise\'. This error happen randomely(acc to my rough observation).
3. When I press *1, sync gets completed but error msg remains. But this time, I am able to listen to announcements.. such as \'security off\', \'night mode\', or any other alarms.
4. When I reset comfort manually, the text error is again displayed. But if I press *1 this time, sync gets completed and I get a proper disply with \'date/time and status\'.
Will it help? because comfort program in both case is same.
1. I connect all modules and start programming. \'Download complete\' indication on PC
2. When I reach kp, it shows the error, \'press *1 to synchronise\'. This error happen randomely(acc to my rough observation).
3. When I press *1, sync gets completed but error msg remains. But this time, I am able to listen to announcements.. such as \'security off\', \'night mode\', or any other alarms.
4. When I reset comfort manually, the text error is again displayed. But if I press *1 this time, sync gets completed and I get a proper disply with \'date/time and status\'.
Will it help? because comfort program in both case is same.
02-17-2009, 01:02 AM
This happens after a full download
What is the firmware of your Minder Pro? You can see this from the label on the U1 IC on Minder Pro PCB marked ULT 5.1__ or do a Transfer > System Information on Comfigurator or Mindit
If your firmware is before ULT5.145 you will see this problem, see forum at
http://www.comfortforums.com/forum60/1195.html
Do a firmware Upgrade using the UCM05 if you have one. For Clipsal this is 5352UCM, not 5350UCM See the picture at https://www.cytech.biz/Default.aspx?cmd=ID%2ftW5Xw2bTCO626ZAAInw%3d%3d&productid=126&categoryid=9&pageindex=
What is the firmware of your Minder Pro? You can see this from the label on the U1 IC on Minder Pro PCB marked ULT 5.1__ or do a Transfer > System Information on Comfigurator or Mindit
If your firmware is before ULT5.145 you will see this problem, see forum at
http://www.comfortforums.com/forum60/1195.html
Do a firmware Upgrade using the UCM05 if you have one. For Clipsal this is 5352UCM, not 5350UCM See the picture at https://www.cytech.biz/Default.aspx?cmd=ID%2ftW5Xw2bTCO626ZAAInw%3d%3d&productid=126&categoryid=9&pageindex=
02-17-2009, 12:59 PM
You are right. The firmware version is 5.054. It\'s old.
And regarding UCM05, we don\'t have its reference in our system in India. So I can\'t order it. Is there any other way to update firmware? Through 5350UCM?
And regarding UCM05, we don\'t have its reference in our system in India. So I can\'t order it. Is there any other way to update firmware? Through 5350UCM?
02-17-2009, 01:35 PM
You can upgrade by getting MPU01 which is a plug in module with new firmware
see the picture and details here
Check with Clipsal if they can order that, otherwise let us know by private message
see the picture and details here
Check with Clipsal if they can order that, otherwise let us know by private message
Pages: 1 2