Hi
I am having a field day with my UCM comms.
I installed DS Manager 5.8.5
My UCM 6.0.0.6 ethernet , F is shunted
My CPU has been updated with the latest firmware.
I have 4 port DSL router. Firewall turned off.
My network cannot auto discover the ethernet UCM.
What\'s the configuration ?
Anybody knows of a network discovery tool > I am runng windows XP
Thanks
Thanks
Hi,
Did you get the ds manager from Cytech or Tibbo website? Chiu told me (and I witnessed) that one version of the program on the Tibbo website had a problem and couldnt see the ucm. Just a thought.
There is a DS-Explorer tool on the Tibbo website (part of Tibo IDE) that you could try too I guess.
I must admit it sounds like firewall or maybe one of these more advanced antivirus suites blocking!
Julian
I sometimes get the same but then I just use my old XP Laptop and connect via a crossover cable to the UCM.
Ingo
Did you sort ok in the end?
Hi
I turned off anti virus check and the firewall.
Still can\'t see UCm
The Tibbo software was downloaded from Cytech
Plugged a Laptop to the same router port I intend using for the UCM. Checked what IP address the port is using.
Reconected same port to UCM with same IP address. Still can\'t find.
Loaded DS Manger on a WIN 7 laptop with a direct connection to UCM. Bitched about the firewall. Turn it off and again nothing.
Used another spanking new UCM I got yesterday with version 5.212 and the sister ethernet board.
And again, can\'t auto discover.
Why me I ask with tears in my eyes.
I tried all access methods. Should I be using the In Band TCP with port 1001 ?
Thanks for all the feedbacks
PS : Could not find DS-Explorer toolon Tibbo website.
Post url if available
Hi
I am using Escan for my Virus protection. Currently all disabled.
Found this neat software that will show you port/ip usage on the router.
http://www.angryip.org
IP 10.0.0.4 is one I should be using but no ping on that IP. But DS Manager shows an ? next to the IP 10.0.0.4 address indicating that someting is there.
Should I be using the In Band TCP with port 1001 ?
Thanks
Can you post a screenshot of what you are seeing in DSManager.
The TCP/Port question should not stop you seeing the UCM in ds manager in the first place though.
Julian