+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Vocabulary Issues (https://www.comfortforums.com/forum-76.html)
+---- Thread: Vocab Download (/thread-1289.html)
- Werner - 01-04-2009
My Comfort II lost its vocab some time ago. When I try to download the vocab (Kate28) I get an error message stating \"Invalid response\". Monitoring I/O gives me the following:
Tx: <STX>LI6789<CR>
Rx: <STX>LU12<CR>
Tx: <STX>SR00<CR>
Rx: <STX>OK<CR>
Tx: <STX>UL000003<CR>
Rx: <STX>DL00000305FF22D7<CR>
Tx: <STX>V?<CR>
Rx: <STX>V?FE057122200100<CR>
Tx: <STX>v?<CR>
Rx: <STX>v?50005000500050005000500050005000<CR>
Tx: <STX>SR01<CR>
Rx: <STX>OK<CR>
Tx: <STX>U?<CR>
Rx: <STX>U?0A0593<CR>
Tx: <STX>VP0000BEF4<CR>
Rx: <STX>OK<CR>
Tx: <STX>VL00002055BEF25900BA02A00387048405D9072E08830A300BA60CE50E710FA5113113EF23<CR>
Rx: <STX>OK<CR>
Tx: <STX>VL002020176119C51C4D1ED521ED24AB27B129532AF52E0D3071332F35ED38513AD93CADD9<CR>
Rx: <STX>VP00<CR>
I have read and tried everything I could find on the forum, but no success.
Regards
- admin - 01-05-2009
Have you reset Comfort and tried the vocab download again?
Your firmware is ULT 5.113. You can do an upgrade to 5.145, see firmware history in the forum http://www.comfortforums.com/forum60/1195.html
There is an improvement in Vocab download
If possible upgrade your ucm firmware to 5.174 using the firmware file from https://www.cytech.biz/Default.aspx?cmd=sQ0OYE9X66w%2b0P%2bAcFsmAI3j73Rwtfrj&fileid=177&dcid=1&pageindex=
However you need another UCM05 to upgrade the UCM05. If you do not have 2 UCMs, just upgrade the ULT firmware and try again
[color=\"#aa0000\"]Also Please note the Vocabulary Upgrading will erase all Messages, Greeting message, recorded Names, Reminder Messages, and Alarm Voice messages on Comfort.
[/color]