+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: Zwave (https://www.comfortforums.com/forum-62.html)
+--- Thread: ZWave Firmware upgrade issues (/thread-4064.html)
- Vangelis - 11-29-2014
I have Zwave3 (2012) UCM running firmware 6.019 and when I try an upgrade via BUS (I have Eth2/UCM) it failed with a Bus Firmware upgrade not Supported error
I have tried upgrading both with 6.024 and the latest and they fail
Guessing I am doing something wrong
System is Comfort 2 Ultra running 7.065
Vangelis
- CytechMartin - 12-01-2014
Hi, I try to duplicate your problem on my side, but it works fine when I upgrade UCM/Z-wave via BUS(Eth02).
You may refer here for more information
http://www.comfortforums.com/forum111/
- slychiu - 12-01-2014
What is your UCM firmware (the one that is being used to do the upgrading?)
Please show the screenshot for the modules page with the firmware listins
- Vangelis - 12-01-2014
Thanks Guys,
The Zwave UCM is at 6.019, I will check what the Eth2 UCM firmware is tonight (if thats what you are referring to?) and put up some screen shots
One thing to note (me just being sill I guess). The firmware upgrade requires the user to press F0 on the keypad. Is this...
In security off mode, just press F followed by 0?
In security off mode, just press F and 0 together?
In security off mode, just press F and 0 together for a few seconds?
Do I need to sign in? User or Engineer?
Vangelis
- slychiu - 12-01-2014
Press F followed by 0, just like when you sign in to go to Engineer menu
- Vangelis - 12-02-2014
Comfort Details
- Vangelis - 12-02-2014
UCM1 (Eth2) Although doesn\'t seem to have identified it?
- Vangelis - 12-02-2014
UCM2 (Zwave3)
- slychiu - 12-02-2014
The UCM/ETH02 is only at firmware 6.002
That should be upgraded according to http://www.comfortforums.com/forum92/3400.html
By the way you can take a screen shot using PrntScrn or ALT-PrntScrn for the active window and paste it into Paint