Posts: 3,493
Threads: 476
Joined: Aug 2006
Reputation:
0
The Bypass symbol is not for bypassing indiividual zones
It is for Force arming
If you try to arm the system but there are open zones they are shown on the app
Pressing the \"Bypas\" icon will automatically byypass alll open zones and arm the system
This is a better wway than bypassing individual zones
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
I have tried that, but nothing happens. I even tried holding the BYPASS button
longer, but with no success.
The \"Allow Force Arm\" parameter in the Modules and Settings tab is checked.
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
I\'m sorry. The bypass works fine. I was doing it wrong.
Thank you.
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
One more thing regarding Home Control Menu on iPAD.
I have tried the feedback types Counter, Flag and Output, but the
status on the iPAD does not update after an On or Off command. Only
when i kill the iPAD app and restart it the status is updated.
Posts: 3,493
Threads: 476
Joined: Aug 2006
Reputation:
0
The on or off command must correspond to the feedback status that you specify
Ie if status is output then your on and off command must be controlling the same output
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
Yes, i have done that. For example, the current On and Off commands are
controlling Output 6 (a relay is connected to output 6 so i can see it turn on and
off). I selected Feedback Type Output and Feedback Name Output 6.
Only when i kill the iPAD app and restart it, the real status is shown.
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
I have upgraded the Comfort controller firmware to 7.027 version and installed the new Comfigurator SW (3.6.8). I have created a test project. With the Home Control menu i am turning the output 6 On and Off. The feedback parameters are as follows:
Feedback type = Output
Feedback Name = Output 6
The status of the output 6 is not shown, instead only a waiting symbol is shown, i.e.
a clock with the text \"waiting\" beside it. Am i missing something?
I also tried the F-2 function on the keypad and it works fine, the keypad announces the correct current state of the output 6.
Posts: 221
Threads: 1
Joined: Sep 2007
Reputation:
0
Hmm... Perhaps the UCM/ETH02 firmware?
Please upgrade to the latest version as well.
Posts: 86
Threads: 27
Joined: Apr 2011
Reputation:
0
Yes, the firmware upgrade fixed the problem. It works fine now.
Thank you for your help!
