I notice there\'s a new \"Display Manual\" hyperlink too against the UCM\'s which is helpful.
I presume the Known Bugs (1) is a one off you just need to do after upgrade to 3.7.5?
Just been playing with \"Action 43: Clear Event Log\"; it works exactly as expected.
Question is though should this not be a privileged action as now it seems anyone could potentially use to cover their tracks? I would have thought a checkbox on the Sign-In Codes page for \"Reset Event Log\" or something?
Also are these new actions going to be available via the Comfort Protocol as well?
UCM/GSM manual link should be seen, there is even a screenshot in the post introducing 3.7.5
UCM manuals should be seen but is missing in the version (still beta)
I dont think there need not be any privileged restriction to action 43 to clear event log. These are programmed by the installer or the user and not accessed during operation. Putting a checkbox on sign in codes and unchecking it is the same as not using the action in the first place. You can always check the user number in the response
Disarming the system is also possible by Response and this is a much higher security risk than clearing the event log. It is up to the one doing the programming to access the security risks for the end user.
There is no need for additional commands in the protocol. You can always use the Do Action DA command to do any action eg DA2B
