Comfigurator 3.9.0 to 3.9.2 (Beta)

[ident]

The new beta version 3.9.0 van be downloaded from https://www.cytech.biz/comfigurator.html?category_id=98 for testing users


The main change is the introduction of the new highly anticipated Graph References feature

Known Issues

1. in Cbus Module, writing to EEPROM without first logging in will cause scanning for modules to be repeated endlessly. The workaround is to log in or do a module scan first
2. using Graph References on some responses , (eg 64,12, 1, 255) will cause an exception
   

Bugs Fixed

1. Lutron commands for use in General and Universal UCM had error when more than 1 control Unit is specifed
2. In Cbus2 Configurator, Read Properties for Cbus did not show the correct value of Resend Sim Options
3. Sound types Tone 1 and Tone 2 limits has been changed 151 to 2400 Hz
4. When doing Firmware Upgrade of KT03 by UCM, the PC is preveneted from going to sleep to allow the upgrade to complete
   

Graphical References

Right click on a Response and select \"Graph References\"




The graph references will look like this




Cursor over Node to see Tooltip
Double-click Response Node to make it the Target Response. Response node is shown with the lamp icon. Note that only a Response can be a target
Double Click the Target Response (in blue) to Edit the Response
Select a Response from the Responses page to change the Target Response


Help > Link to App Conversion Utility

This links to the Comfort app conversion utility
\"Convert cclx file for iOS/Android app\"








Comfort Server Manager
CSM 2.02 is included in Comfigurator, in Options > Settings, select Network (Local)

[mikegriff]

Hi 
I get this exception with some Responses when I try and view Graph Reference

the simplest response that does it is has these lines 
Siren Ring
Say Zone Name
with action codes
64,12, 1, 255

Mike

[ident]

Thanks, we confirm the exception and wil get it fixed


Note
The exception has been fixed in 3.9.1

[ident]

Comfigurator (Beta) 3.9.1 is now available for testing

The changes are:

Known Bugs

1. Options for Firmware Upgrade to Comfort Control are disabled, hence Comfort firmware cannot be upgraded
   

Bugs Fixed

1. in Cbus Module, writing to EEPROM without first logging in caused scanning for modules to be repeated endlessly.
   
2. using Graph References on some responses , (eg 64,12, 1, 255)  caused an exception. However there may be other Responses which may cause exception
3. Upgrading Firmware and Writing to KT03 via UCM/ETH03 used to have an error when the PC does to sleep due to the logn duration of these operations to KT03. The PC is prevented from going to sleep in the new version
   

Improvements

• Graph Reference Objects are colour coded: The Target Response is in Blue, Other Responses are in Green, and other events, ie not Responses are in White. This helps to identify other Responses which can become the new target by double-clicking on it, eg see below

New Actions

Action 190 - Wait for Timer
eg, the following Response will  switch on the Corridor Lights, wait 10 minutes, switch off the corridor Lights, switch on the Landing Lights, wait 5 minutes, then switch off the Landing Lights. This requires Comfort Firmware 7.063

Response example:
Do CorridorLightsOn
Wait 600 Seconds Using Timer01
Do CorridorLightsOff
Do LandingLightsOn
Wait 300 Seconds Using Timer01
Do LandingLightsOff

Before the new action as introduced, this sequence would require 3 Responses, ie
1st Response:
Do CorridorLightsOn
Do 2ndResponse after 600 Seconds Using Timer01

2ndResponse:
Do CorridorLightsOff
Do LandingLightsOn
Do 3rdResponse after 300 seconds  Using Timer01

3rdResponse:
Do LandingLightsOff

Thus, this new action simplifies the programming of delays in Responses.

Note that the Wait for Timer action will not block any other Responses from working during the delay. For example a zone response will be activated if the zone is opened during any of the delays between the actions



Action 156 - Keypad Backlight On/Off
This requires Comfort Firmware 7.061
This turns on the backlight of any individual Keypad or all keypads. One use of this is to turn on the keypad backlight when motion is detected in the area at night, when lights are switched off

[juwi_uk]

Wouldn\'t the more logical place for the \"Convert CCLX.. Android\" menu action be on the \"FILE\" menu rather than the \"HELP\" menu as that\'s the first place I\'d look.

[ident]

Comfigurator 3.9.2 (beta) fixes the bug where Comfort Firmware upgrade was grayed out in the Modules Tab

[TheMax74]

Wow Great improvements! Nice job.