Login

**wexfordman** · 05-19-2015, 02:17 AM

okay, reconfigured the control menu as you outlined, and icons etc all appear to be working and editable now.

Had the app crash few times, and seems a little slow, but will see how it is overall one I use it a it more.

Thanks a million, looks great :-)

**wexfordman** · 05-20-2015, 02:09 AM

Hi,

Just an update on how things are working now that the icons arc are working.

I find it crashes quite a lot or Hangs.

I have one Veonus dimming. module which I set up the slider to work with. It freezes or crashes when it is used. I suspect this may be my understanding of how to implement it being wrong though.

***slychiu*** · 05-20-2015, 04:22 PM

Your firmware is ULT 7.065, can you upgrade to 7.072 (Beta) which fixes some problem with the slider

**wexfordman** · 05-21-2015, 12:59 AM

[user=1]slychiu[/user] wrote:

Quote:Your firmware is ULT 7.065, can you upgrade to 7.072 (Beta) which fixes some problem with the slider

Thanks
I did that. The slider does not work , but again that may be more to do with my programming.
The app itself though seems very buggy, pauses, freezes or just very slow to respond to commands.

***slychiu*** · 05-21-2015, 06:48 AM

Is there a certain point that the app has problems?
can you try uninstallling and re-installing again, as that worked for Julian

***slychiu*** · 05-21-2015, 09:18 AM

If you dont touch the slider do you have the problem?

**wexfordman** · 05-22-2015, 12:26 PM

[user=1]slychiu[/user] wrote:

Quote:If you dont touch the slider do you have the problem?

Hi,
Nope, without even going near the slider, the app seems very unresponsive, and takes a long time to react to a keypush to turn on a light, sometimes taking several attempts.
I deleted and re-installed with no improvement.
The gen 1 app is much faster in comparison.
Regards,EAmon

***slychiu*** · 05-22-2015, 12:31 PM

How about the Gen2 app v1.3 before this 1.4 update? Did you encounter the same problem?

**Ingo** · 05-22-2015, 01:25 PM

I also have an issue with the new app. When I start the app the Login button is greyed out. I have to switch from Local to Remote and back to Local again to have the button become available.

***slychiu*** · 05-22-2015, 01:33 PM

Same question, do you mean the Gen2 1.4 app compared to 1.3 or the G2 app compared to the 1st gen app?