Comfort Automation/ Security System Forums

Those thresholds were hardcoded as I didn\'t have a reference for them. If you can supply me with threshold values you would prefer then I can update the code accordingly.

Low battery = 11.5V (value = 187)
DC Power Fail = 9.6V (value = 116)

dont forget to swap around the names of the Charger voltage and Battery voltage  Thanks

Hello, I have not touch my comfort for a while, using comfort2mqtt (koochyrat) on a debian vm. Installing and playing with HA, I found this post and added on my HA.
I can see that bridge and comfort ultra are created, but got an error when starting the add on. HA find the comfort, I see the log but stop with \"list index out of range, halt with exit code 1\".
My comfort firmware is 7.142. My battery is currently in error ( low battery\").
I tried to upgrade the firmware with comfigurator over ethernet, but got DUT error.

Before I dismount things , may be you could point me to another reason the add on stops. I guess its not because of the battery. Thank you for the addon and your help here

How did you try to upgrade the comfort? by programming cable or y right lcicking in modules?
seee http://www.comfortforums.com/forum4/1783.html
copy the Monitor IO when you do this and fails

Stupid me, I was using the \"upgrade with cable\" without the cable. Now using the right click on ucm does not work (after F0) and I got this
> LI****
< LU01> DT
< DT2024121718242100> EL
< EL11FFFFFFFFFF> UL000003
< DL00000305FF22D7> V?
< V?FE078E22400100> v?
< v?05FF27010203FFFF> U?
< U?0A076211> SN01
< SN0123010100> u?00
< u?110A076200
< u?1219076A00
< SN11FFFFFFFF
< SN12FFFFFFFF
< u?3103010400
< SN3100000000
< u?4100000000
< SN4100000000
< u?4200000000
< SN4200000000
< u?FFFFFFFFFF> RD12000002
< RD1200000200FEEE> f?00
> Y?
> Z?
> z?
> M?
> K?
> a?
> d?
< NA
< f?007DFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
< Y?0120
< Z?02C0
< z?000000000000000000000000000000
< M?0001
< KL00020200
< a?070102000100000000
< cc00> LT01
< OK> UB01010A
< UBF1> LI
< LU00> LI****
< LU01> DT
< DT2024121718313400> EL
< EL11FFFFFFFFFF> UL000003
< DL00000305FF22D7> V?
< V?FE078E22400100> v?
< v?05FF27010203FFFF> U?
< U?0A076211> f?00
> Y?
> Z?
> z?
> M?
> K?
> a?
> d?
< NA
< f?007DFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
< Y?0120
< Z?02C0
< z?000000000000000000000000000000
< M?0001
< KL00020200
< a?070102000100000000> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5
< SM000000
< DT2024121718330200
< AL0701016C0301
< a?070102000100000000
< KL00020200
< MD0001
< DT2024121718330300
< AL0701016C0301
< a?070102000100000000
< KL00020200
< SM000000
< MD0001
< DT2024121718330800
< AL0701016C0301
< a?070102000100000000
< KL00020200
< SM000000
< SM000000
< SM000000
< SM000140
< SM000000> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> DAC512531101
< RA0000
< SS190023
< SS19001E> DAC512531100
< RA0000> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5
< LU00

I have a battery warning, would it be the problem?

\"UBF5\" reply means F0 on the keypad has not been pressed. Dont type F0 in Monitor I/O.  Press F and 0 on the keypad before you do the upgrade

[user=4799]phil1155[/user] wrote:

Quote:Hello, I have not touch my comfort for a while, using comfort2mqtt (koochyrat) on a debian vm. Installing and playing with HA, I found this post and added on my HA.
I can see that bridge and comfort ultra are created, but got an error when starting the add on. HA find the comfort, I see the log but stop with \"list index out of range, halt with exit code 1\".
My comfort firmware is 7.142. My battery is currently in error ( low battery\").
I tried to upgrade the firmware with comfigurator over ethernet, but got DUT error.

Before I dismount things , may be you could point me to another reason the add on stops. I guess its not because of the battery. Thank you for the addon and your help here

Without supplying the full DEBUG output of the AddOn I cannot suggest any course of action. Please provide the AddOn DEBUG output at the time of the failure.

Thanks Ingo and Chiu, I reinstall the addon, following Chiu part1 to 5 rcommendations.And updated the firmware, replaced my battery. I finally had the 3 comfort devices. So far so good, the alarm control panel in HA works. But after upgrading again my firmware, and rebooting my HA, I see now just two comfort devices, bridge and ultra. But the alarm control panel still works. The log seems ok, I guess the problem is not because of the cclx file not in ha addon?
Many thanks to both .

My new problem is phone controler trouble. the phone line has been disconnected 15 years ago and no line in /out plugs any more on comfort. The \"ignore line cut\" is Y. I dont see other point to investigate, by reading the forum. Any suggestion? Thanks

Whrere do you see the phone trouble alar,, on Comfort Keypad or the Home assistant app? There is no phone trouble alarm AL03.... in the logs so I dont think it is caused by Comfort

This topic is very long, please continue at

http://www.comfortforums.com/forum143/5579.html