https://www.comfortforums.com/ Sat, 22 Aug 2026 12:21:16 +0000 MyBB https://www.comfortforums.com/thread-5480.html Fri, 23 Feb 2024 10:38:57 -0500 ]]> https://www.comfortforums.com/thread-5480.html


  Firmware 7.201.jpg (Size: 36.28 KB / Downloads: 17) ]]>


  Firmware 7.201.jpg (Size: 36.28 KB / Downloads: 17) ]]> https://www.comfortforums.com/thread-4695.html Thu, 08 Jun 2017 23:02:03 -0400 ]]> https://www.comfortforums.com/thread-4695.html From what I have read I need to upgrade to a more recent firmware 7.117.
I will be using a new USB/UCM module which is also coming today.
Please could you confirm the steps I need to take to upgrade successfully.
or let me have the link to where on the forum this question has already been answered.
Many thanks



  IMG_1559 crop.jpeg (Size: 259.38 KB / Downloads: 25) ]]> From what I have read I need to upgrade to a more recent firmware 7.117.
I will be using a new USB/UCM module which is also coming today.
Please could you confirm the steps I need to take to upgrade successfully.
or let me have the link to where on the forum this question has already been answered.
Many thanks



  IMG_1559 crop.jpeg (Size: 259.38 KB / Downloads: 25) ]]> https://www.comfortforums.com/thread-4341.html Wed, 14 Oct 2015 14:13:21 -0400 ]]> https://www.comfortforums.com/thread-4341.html I have the following
Comrfort system 5.164
UCM01 serial 5.178
UCM cbus 5.154
UCM universal 6.026
RIO 2.08
Slave - comfigurator doesn\'t display this, but it was bought at the same time probably the same as above comfort system
I\'d like to know, what are my upgrade options in order to go to V7 firmware?
I\'m thinking that the only way to do it is to remove the serial UCM from my slave and place it on the main panel so I can upgrade with the jumper board and a laptop. But what versions should I go with? Can I go directly to V7 firmware? What about the slaves and other UCM\'s, will they be compatible, how do I upgrade those?
Ultimately I need to fix some telephone bugs and want to use the latest UCM/ETH03 which apparently needs V7 firmware. Would it be useful to get the new ethernet UCM now and use that as part of the upgrade process, if so how?

Grateful for any help/suggestions in advance, I just don\'t want to brick the system!.Paul]]> I have the following
Comrfort system 5.164
UCM01 serial 5.178
UCM cbus 5.154
UCM universal 6.026
RIO 2.08
Slave - comfigurator doesn\'t display this, but it was bought at the same time probably the same as above comfort system
I\'d like to know, what are my upgrade options in order to go to V7 firmware?
I\'m thinking that the only way to do it is to remove the serial UCM from my slave and place it on the main panel so I can upgrade with the jumper board and a laptop. But what versions should I go with? Can I go directly to V7 firmware? What about the slaves and other UCM\'s, will they be compatible, how do I upgrade those?
Ultimately I need to fix some telephone bugs and want to use the latest UCM/ETH03 which apparently needs V7 firmware. Would it be useful to get the new ethernet UCM now and use that as part of the upgrade process, if so how?

Grateful for any help/suggestions in advance, I just don\'t want to brick the system!.Paul]]> https://www.comfortforums.com/thread-2418.html Mon, 15 Aug 2011 06:44:23 -0400 ]]> https://www.comfortforums.com/thread-2418.html https://www.comfortforums.com/thread-2417.html Mon, 15 Aug 2011 05:27:18 -0400 ]]> https://www.comfortforums.com/thread-2417.html
 
]]>
 
]]> https://www.comfortforums.com/thread-1936.html Sun, 25 Jul 2010 03:25:00 -0400 ]]> https://www.comfortforums.com/thread-1936.html
1x Comfort Ultra II - v5.079

1x SEM02 - v4.177

1x UCM CBUS - v5.75

1x UCM - v5.92

1x UCM - v5.092

1x Keypad KP04 (how do you determine the current firmware version on this product)

1x Keypad KP03 (how do you determine the current firmware version on this product)

2x Door Station DP03 (how do you determine current the firmware version on this product)

Can the above be firmware up datable via upload?
]]>
1x Comfort Ultra II - v5.079

1x SEM02 - v4.177

1x UCM CBUS - v5.75

1x UCM - v5.92

1x UCM - v5.092

1x Keypad KP04 (how do you determine the current firmware version on this product)

1x Keypad KP03 (how do you determine the current firmware version on this product)

2x Door Station DP03 (how do you determine current the firmware version on this product)

Can the above be firmware up datable via upload?
]]> https://www.comfortforums.com/thread-1740.html Tue, 02 Feb 2010 21:11:06 -0500 ]]> https://www.comfortforums.com/thread-1740.html
This is important because older firmware may have problems which have been discovered and fixed and documented in the Firmware History topics in this forum

Installers who do not use the latest firmware are causing themselves (and us) needless problems

It is not necessary to upgrade systems which have been installed if none of the issues described in the \"Known Bugs\" list are encountered

Firmware Upgrade requires a UCM/232 (formerly UCM05), UCM/USB, or UCM/Ethernet. Instructions can be found at http://www.comfortforums.com/forum4/1216.html and also in detail on the UCM Manual on our website

]]>
This is important because older firmware may have problems which have been discovered and fixed and documented in the Firmware History topics in this forum

Installers who do not use the latest firmware are causing themselves (and us) needless problems

It is not necessary to upgrade systems which have been installed if none of the issues described in the \"Known Bugs\" list are encountered

Firmware Upgrade requires a UCM/232 (formerly UCM05), UCM/USB, or UCM/Ethernet. Instructions can be found at http://www.comfortforums.com/forum4/1216.html and also in detail on the UCM Manual on our website

]]> https://www.comfortforums.com/thread-1601.html Wed, 23 Sep 2009 12:42:32 -0400 ]]> https://www.comfortforums.com/thread-1601.html
I do have the flash upgradeable part fitted, and a couple of the newer UCM\'s that are able to do the flash upgrade process. I even have the programming cable connected permanently at the Comfort CPU end (not connected at the UCM end) - You may recall I asked about this a couple of years ago when the flash parts first came along, since it was ridiculously impractical not leave the programming cable connected at the cpu end, since the flash module is completely obscured by the LEM which sits above it on the pillars. - To physically connect up the programming cable at the comfort CPU end each time would involve almost completely dissassembling the system - removing all the cables going to all the LEM zones, removing the LEM etc. - basically a complete nightmare! - The discussion we had at the time essentially came to the conclusion that it should be OK to leave the programming cable connected at the CPU end, leaving the UCM end disconneted except when actually being used for programming...

So I guess its about time I did an upgrade, and I want to research the process again before I charge in & maybe break something... Firstly, I\'d like to know what the latest firmware version is, and read the release notes for all the releases after 5.113 so I am familiar with exactly what has changed between then & now...

I believe I\'m also a few releases behind the current vocabulary as well? - again, I\'ve never done a vocabulary upgrade, and I\'ve read quite enough posts in the forums highlighting some horror stories where vocab upgrades have apparently barfed a Comfort system - something which I absolutely do not want to happen here!

So my next question is exactly what, if any, dependencies are there between firmware & vocab upgrades? - i.e. if I upgrade to the latest firmare, is an upgrade to the latest vocab a *requirement* - or can I leave the vocab well alone?

Thanks

P.


  Comfort properties.JPG (Size: 15.76 KB / Downloads: 71) ]]>
I do have the flash upgradeable part fitted, and a couple of the newer UCM\'s that are able to do the flash upgrade process. I even have the programming cable connected permanently at the Comfort CPU end (not connected at the UCM end) - You may recall I asked about this a couple of years ago when the flash parts first came along, since it was ridiculously impractical not leave the programming cable connected at the cpu end, since the flash module is completely obscured by the LEM which sits above it on the pillars. - To physically connect up the programming cable at the comfort CPU end each time would involve almost completely dissassembling the system - removing all the cables going to all the LEM zones, removing the LEM etc. - basically a complete nightmare! - The discussion we had at the time essentially came to the conclusion that it should be OK to leave the programming cable connected at the CPU end, leaving the UCM end disconneted except when actually being used for programming...

So I guess its about time I did an upgrade, and I want to research the process again before I charge in & maybe break something... Firstly, I\'d like to know what the latest firmware version is, and read the release notes for all the releases after 5.113 so I am familiar with exactly what has changed between then & now...

I believe I\'m also a few releases behind the current vocabulary as well? - again, I\'ve never done a vocabulary upgrade, and I\'ve read quite enough posts in the forums highlighting some horror stories where vocab upgrades have apparently barfed a Comfort system - something which I absolutely do not want to happen here!

So my next question is exactly what, if any, dependencies are there between firmware & vocab upgrades? - i.e. if I upgrade to the latest firmare, is an upgrade to the latest vocab a *requirement* - or can I leave the vocab well alone?

Thanks

P.


  Comfort properties.JPG (Size: 15.76 KB / Downloads: 71) ]]> https://www.comfortforums.com/thread-1218.html Sun, 02 Nov 2008 02:34:42 -0500 ]]> https://www.comfortforums.com/thread-1218.html

http://www.comfortforums.com/forum4/1783.html




]]>

http://www.comfortforums.com/forum4/1783.html




]]>