Login

***slychiu*** · 04-24-2019, 05:12 AM

I see that you are using ETH02ETH02 fails when trying to upgrade the vocabulary. It was obsoleted about 7 years ago

I suggest changing to ETH03

waynebr · 04-24-2019, 07:08 AM

So I\'m clear are you saying the eth02 is failing so an eth03 will fix the issue?

waynebr · (This post was last modified: 04-24-2019, 07:16 AM by waynebr.)

If this is the case I might have to wait till the pi module is released

***slychiu*** · 04-24-2019, 07:56 AM

No ETH002 is not faulty, but it does not handle the Vocab Upgrade, whereas ETH03 canYou can buy an ETH03 submodule to plug in to the UCM to replace ETH02.

waynebr · (This post was last modified: 05-11-2019, 05:16 PM by waynebr.)

Hi I have now replaced the Eth02 with a Eth/PI, I\'m still getting vocab errors when trying to upload it. I have attached the log.
***Apologies - Ignore this Matt has just told me that the UCM /PI does not support binary text yet. I will review again when it does ***

***slychiu*** · 05-12-2019, 01:57 AM

I suggest you send the DSP board to Laser. They have a Voice programmer module that can reprogram the Vocab. If that does not work then that DSP board may be faulty and needs to be replaced

waynebr · 05-12-2019, 11:50 AM

Thanks I will wait until the new firmware is released for the UCM PI and try that. Otherwise I will need to take the board out and send it off.