X10 cable

[Pesa11]

Hello,

 

I have got a problem. I can not receive and transmit X10 codes. Which cable do I use between Comfort II and XM10. Look at see the picture from XM10 connection.

 

Could you tell me what is Comfort II X10 plug connection order?

 

Br

Pesa

[slychiu]

The X10 telephone cable should be reversed ie pin 4 to 1, 3 to 2, 2 to 3, and 4 to 1
The picture below from the Installation Manual shows how the telephone cable shoujd look when you view it from the side

[bryanajones]

I\'ve just hit the same problem. I\'m buying the XM10U and have a choice of a cross over lead and a straight through lead.

Reading this thread I\'m a little confused. Looking at the diagram I would have said that that was a straight through cable, but reading what you\'ve written it sounds like a cross over cable?

I might be able to use a multi meter if I buy the cables, but given the choices from a web site all it says is cross over or straight through. Which does comfort need?

Thanks

Bryan

[ident]

A cross over cable is what you need, ie 1 to 4, 2 to 3, 3 to 2, 4 to 1
I dont know why the cables are not supplied with the product

[bryanajones]

its a separate purchase so I guess they want to make more money