Temp in celsius

[TheMax74]

Hi, as i can read from the user\'s manual, the SCS gives the output temp in °F but later, it says

\"In the Home Control Menu, sensor registers may be used as a feedback. To
do so, the feedback type must be set to type 7 (which is sensor register)
and the feedback value set to the register number. (...)
The temperature may also be announced in either °F or °C. The default
setting is in °C.\"

In a response, the temperature is reported in °F (as indicated in the user\'s manual).
Can i have the temperature reported in °C in responses?

Thanks

[admin]

This conversion will be available in the next firmware release. Beta firmware Ultra 5.166 is available from
https://www.cytech.biz/Default.aspx?cmd=sQ0OYE9X66w%2b0P%2bAcFsmAI3j73Rwtfrj&fileid=215&dcid=1&pageindex=
There is a new action to announce temperature in degrees C
This does not include the changing of the units in sensor registers but that will be available soon

[TheMax74]

Great, thks

[cc_uk]

Is there now an option to have the temperature values in the SCS in Celsius? I\'d be keen to worth throughout in Celsius if possible

[ident]

No, the value is saved in Fahrenheit still