Comfigurator 3.11.6

[slychiu]

Known Bugs

1. If Input does not work for Input > 64 to 96. This also applies for older versions
   
2. Deg C /deg F in Comfiguration flags is incorrect
   
3. Optimum when adding  UCM/KNX2 causes exception
4. Read from KP06A or KP04A does not change the KP06A/KP04A settings  in Comfigurator
5. IRIO IR codes do not refresh when new IR codes are learned. Refresh button is needed
   
6. Default template def40.cctx for UCM/Logic is missing from the installation. Please do File > Update Defaults to update the set of  default templates.
   
7. In Flags screen, if Check Status box is checked for a flag, the status is updated, but if the flag changes subsequently, the flag status in the centre pane is not updated until you go to another page and back, or uncheck and check the box (old bug)
8. Export Scenario does not work. Selecting any items will cause an exception
   

Bugs Fixed

1. Actions for UCM/KNX2 did not work
   
2. Importing a Configuration Item from a file with a different file system causes exception (old bug)
3. Known Bugs in HIO and IRIO have been fixed

New Features

1. Support for 4 Partitions in Comfort (requires Comfort Firmware 7.110)
2. In Security > Zones, each zone has new settings for Partition and EOL shunts. These are for future Comfort features
3. Support for UCM/Logic in File > New
   

[cc_uk]

Partitions sounds great! Do you plan a post about that specifically to detail how it should be used?

[slychiu]

Yes information about partitions is coming soon

[strickers]

+1 for Partitions! Does that mean I can arm the garage while the house is unarmed?

[juwi_uk]

Oooh that sounds like a good idea.

[slychiu]

Yes, or the other way round. As long as the house and garage have separate entrances

[slychiu]

Comfigurator [color=\"#ff0000\"]3.11.6[/color] is released
It supports the Partitions feature and new products IRIO, HIO, UCM/KNX2, UCM/Logic (some of which are not released yet)

Otherwise, everything else works as usual

[juwi_uk]

You\'ve gone back in time; assume you mean 3.11.6.0 rather than 3.1.6!!  :0)

[slychiu]

corrected, thanks
Hopefully nobody got 3.1.6

[slychiu]

Default template def40.cctx for UCM/Logic is missing from the installation. This can be fixed by File > Update Defaults to update the set of  default templates.