|
Unable to connect to Pc
|
09-15-2016, 07:06 PM
(This post was last modified: 09-15-2016, 07:07 PM by emabonacchi.)
Reading event log, only read 2% and date and time are uncorrect (for example \"88/01 05:37\").
09-16-2016, 10:11 AM
If you can read the event log, it means UCM and Comfort both are working
on UCM D9 Red is blinking and D10 Green is binking fast so it appears to be permanently on Right Click on Modules , Scan for Modules and check that all the modules eg Keypds, UCms are found Do a Write to Comfort with your cclx file
08-20-2018, 07:34 AM
Yes it looks like there is some fault
do you have to use UCM with Firmware programming cable and look if you can upgrade the firmware? |
| Users browsing this thread: |
| 2 Guest(s) |
