Comfigurator Crashing

[Warby]

Hi

Whenever i execute this response from comfigurator the program abruptly close!

The response is working when it is running on composer. There are a few response the same but using differant Preset messages and linking to differant responses and they are shutting it down as well. I Have just updated to Comfigurator v2.2.1 bit it was doing it before that.

If Input LSM <> 0 Then
    If Flag Flag01 = 0 Then
        Dynalite LinearPreset 2 30 0 0 255
        Do Dininggardanoff [Outside Formal Dining Off] After 180 Seconds Using Timer03    (it is line in the program)    
    End If
    If Flag Flag04 = 0 Then
        If  SecurityMode = AwayMode Then
            Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
            Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
        End If
        If  SecurityMode = VacationMode Then
            Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
            Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
        End If
    End If
End If

Thanks

[ident]

Can you send your complete ccl file to support@cytech.biz so we can duplicate it?
Have you tried this using 2.2.1

[Warby]

I Have tried it on V2.2.1 and it still does it! Will email it Promptly.

Thanks

[slychiu]

In Configuration, Use Branch Actions is not checked. If you have Comfort II, can you try checking this box and see if the same problem occurs?

[slychiu]

This has been traced to Comfigurator handling of long Responses, and will be fixed in the next release. Thanks for your feedback

[Warby]

Thanks. I take it it is only a comfigurator issues and won\'t affect the operation of the alarm?

[slychiu]

Just a Comfigurator problem, dont worry