New System Configuration

[EOTB]

Having never installed a Comfort System before, would it be OK for you guys to just go over my shopping list, just incase there is any drastic errors in the design.

Brief background:

• Have 3 storey house
  
• Centralizing system on each floor with Slave unit
  
• Including Fire detectors.
  
• Utilzing basic lighting control with Comfort modules

Shopping List

• 1x CP9000-ULT/EN03
  
• 2x SEP01/M2/EN03
  
• 3x LEM02-M2 (To connect to SEP and main CPU)
  
• 1x UCM05
  
• 1x TPB01
  
• 1x RGR04
  
• 3x TWS02 *
  
• 3x Batteries
  
• 3x KP03E (For each floor)
  
• 1x DP03
  
• 1x DP03_Hood
  
• 7x PIRs
  
• 4x Mag Contacts
  
• 2x ROR Fire Sensor (12v)
  
• 10x Optical/Heat Sensors (12v)
  
• 3x 16R - 8 Pack (2k7 & 4k7) Zone Resistors
  
• CAT5e UTP or STP Cable (depending on audio tests)
  
• 6core Alarm Cable
  
• 3x Internal Sounders (for each floor)

* I will be installing one TWS02 into each SEP and main CPU enclosures to control 2 lights on each floor. I have already rewired the house and centralized the lighting cables to a single location (eg cables to each light switch and light bulb).


For the boards I am installing with the main and slaves, will there be enough room in the provided enclosures?


Thanks for your help


Adam.

[slychiu]

Your equipment list should be sufficient for the configuration
The TWS modules is normally mounted in a separate enclosure from the low voltage Comfort modules so that there is sufficient separation. Other than that the space should be sufficient.

[EOTB]

Thanks for the info.