Door station calls to mobile phone

[admin]

Action 199 was implemented from Action 4.233 onwards
This is documented in the Action Codes Manual downloadable from www.cytech.biz/manuals.html

If you have Comfort I Pro 4.22 (not 4.220) it should be have been built in 1998.!

[johnathan_dooley]

The firmware I have is v4.222  (4.22 was a typo)

I want Comfort to announce when an event has happened such as \"Heater On\"

If I do not upgrade to 4.233, then it appears the only way i can do this is to record and play back a reminder message, when the event occurs.

Can you confirm?

 

Thanks

[admin]

Yes you can use the action Play Reminder Message N on keypads/door stations triggered by any event
You record a reminder message 1 to 8 on the keypad or telephone - telephone in preffered for lower noise

[roytheboy25]

I have firmware version 4.234 and cannot get action  199 to work either.

Any suggestions what may be the problem.

[slychiu]

We gave determined that Action 199 (Say Words) does not work in Comfort I 4.234 or any Comfort I firmware. You need Comfort II for this action

[Ghyllwood]

I have a Fermax intercom on the gate and also at the front door. I have integrated this with 2 X DM01 interfaces. Now ever since I have had this installed I cannot get the volume right and I can hardly hear the caller on my mobile phone. The level is not too bad on the house phone and similar to that of the Fermax handset.
Are the adjustments I can make to get the Fermax intercom louder on my mobile? The Menu and answer phone level is fine over the mobile.
If I changed to DMO2 interfaces for the Fermax, is this going to improve anything?

Any thoughts on this greatly appreciated. Thanks Graham

[admin]

We need to know what Comfort firmware you have, Comfort I or Comfort II, and what firmware versions

If Comfort II you should upgrade to the latest firmware currently 5.183, see http://www.comfortforums.com/forum79/1784.html for download link and history

Also upgrade to the latest Comfigurator 3.1.9 and do a selective write of Tuning parameters to the system This should give good audio levels for the Intercom

Lets close this topic and start a new topic  in the \"Problems and Troibleshooting\" forum at http://www.comfortforums.com/forum36/ devoted to your question rather than adding to  the end of this post which is not related, to do with how to dial out for door station