[user=1781]technik23[/user] wrote: Quote:Sorry more problems.
1) When I initially set up the CWM I just wanted to use it on the local LAN so I left the LAN configuration blank. I now want to move on to accessing through the web and the configuration program will not take me back to that page.
2) I mentioned this in an e-mail but using your Dynamic IP setup doesn\'t seem to work as it uses your old web site. I thought I might fix it by getting an update but that also looks at the old web site.
First of all, can you access the CWM on the local LAN? If you are still using the default IP address, it will be
http://10.0.0.16
You don\'t need the CWMSetup program to access the configuration page. Use address
http://10.0.0.16/admin.htm (assuming that your IP is 10.0.0.16). If your port has changed from the default 80, then the address will be
http://10.0.0.16:portnumber/admin.htm , where portnumber is the new port number that you have set. Hence, if the new port number is 8080, then the address will be
http://10.0.0.16:8080/admin.htm .
Once you have setup the network properly, then do \"Update CWM\". Be patient on this one, as the screen may seem \"hang\" while CWM is updating with the new files. Wait until the summary screen comes out.
If you are able to update correctly, the Dynamic IP should work correctly.
You can send me private messages, if you still encounter problems.
