Current Firmware

[juwi_uk]

Whats the latest firmware version for the Zwave UCM?

I went to check on the website but no Zwave firmware downloads there either (unlike with other UCM types)!

Julian

[slychiu]

There is now a Firmware History subforum for UCM/Zwave with links to the firmware upgrade
http://www.comfortforums.com/forum93/

[Howser]

[user=1]slychiu[/user] wrote:

There is now a Firmware History subforum for UCM/Zwave with links to the firmware upgrade

I cannot seem to find the link. I have a UCM/Zwave that has Zwave 5.157 written on it. I am trying to ascertain which UCM/Zwave (1,2 or 3) it is.

[ident]

see http://www.comfortforums.com/forum93/

The Subforum is always under the main Forum
If you go to the Zwave Forum, http://www.comfortforums.com/forum62/
you will see the Subforum above the topics

[Howser]

I saw those, I thought there were detailed version histories I missed.

I have a UCM/Zwave that has Zwave 5.157 written on it. I am trying to ascertain which UCM/Zwave (1,2 or 3) it is.

Can you help?

[ident]

1. Zwave 1 did not have an EEPROM in the U2 socket and could not use the Zwave Configurator. It can send 1 way Zwave commands
2. Zwave2 has a U4 EEPROM plugged into the socket, and uses the Zwave Configurator. It can send 1 way commands. It starts from Zwave 5.180 firmware
   
3. Zwave3 is able to send and receive Zwave commands. Firmware version 6 is required. Also the zwave module must be loaded with the \"Bridge Controller\" function which can be seen in the screenshot below

The firmware can be upgraded to the latest but the important thing to check is whether there is an EEPROM in the U2 socket, and if there is check for Bridge Controller function

[Howser]

[user=86]ident[/user] wrote:

1. Zwave 1 did not have an EEPROM in the U2 socket and could not use the Zwave Configurator. It can send 1 way Zwave commands
2. Zwave2 has a U4 EEPROM plugged into the socket, and uses the Zwave Configurator. It can send 1 way commands. It starts from Zwave 5.180 firmware
   
3. Zwave3 is able to send and receive Zwave commands. Firmware version 6 is required. Also the zwave module must be loaded with the \"Bridge Controller\" function which can be seen in the screenshot below

The firmware can be upgraded to the latest but the important thing to check is whether there is an EEPROM in the U2 socket, and if there is check for Bridge Controller function

So this means I just bought a Zwave1?

[slychiu]

Can you return it to the distributor and ask for an exchange?

[Howser]

I will speak to the distributor today.

[Howser]

Got the replacement UCM today. When I try to upgrade firmware (via Comfort BUS) to 6.024, I get the error \"Firmware upgrade encounted errors\"

I am using Comfort II Ultra (6.028) and Configurator 3.5.6, I have upgraded other UCMs before (Cbus & GSM) without any issues.