New Comfort2MQTT for Home Assistant

[Ingo]

Those thresholds were hardcoded as I didn\'t have a reference for them. If you can supply me with threshold values you would prefer then I can update the code accordingly.

[slychiu]

Low battery = 11.5V (value = 187)
DC Power Fail = 9.6V (value = 116)

dont forget to swap around the names of the Charger voltage and Battery voltage  Thanks

[phil1155]

Hello, I have not touch my comfort for a while, using comfort2mqtt (koochyrat) on a debian vm. Installing and playing with HA, I found this post and added on my HA.
I can see that bridge and comfort ultra are created, but got an error when starting the add on. HA find the comfort, I see the log but stop with \"list index out of range, halt with exit code 1\".
My comfort firmware is 7.142. My battery is currently in error ( low battery\").
I tried to upgrade the firmware with comfigurator over ethernet, but got DUT error.

Before I dismount things , may be you could point me to another reason the add on stops. I guess its not because of the battery. Thank you for the addon and your help here

[slychiu]

How did you try to upgrade the comfort? by programming cable or y right lcicking in modules?
seee http://www.comfortforums.com/forum4/1783.html
copy the Monitor IO when you do this and fails

[phil1155]

Stupid me, I was using the \"upgrade with cable\" without the cable. Now using the right click on ucm does not work (after F0) and I got this
> LI****
< LU01> DT
< DT2024121718242100> EL
< EL11FFFFFFFFFF> UL000003
< DL00000305FF22D7> V?
< V?FE078E22400100> v?
< v?05FF27010203FFFF> U?
< U?0A076211> SN01
< SN0123010100> u?00
< u?110A076200
< u?1219076A00
< SN11FFFFFFFF
< SN12FFFFFFFF
< u?3103010400
< SN3100000000
< u?4100000000
< SN4100000000
< u?4200000000
< SN4200000000
< u?FFFFFFFFFF> RD12000002
< RD1200000200FEEE> f?00
> Y?
> Z?
> z?
> M?
> K?
> a?
> d?
< NA
< f?007DFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
< Y?0120
< Z?02C0
< z?000000000000000000000000000000
< M?0001
< KL00020200
< a?070102000100000000
< cc00> LT01
< OK> UB01010A
< UBF1> LI
< LU00> LI****
< LU01> DT
< DT2024121718313400> EL
< EL11FFFFFFFFFF> UL000003
< DL00000305FF22D7> V?
< V?FE078E22400100> v?
< v?05FF27010203FFFF> U?
< U?0A076211> f?00
> Y?
> Z?
> z?
> M?
> K?
> a?
> d?
< NA
< f?007DFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
< Y?0120
< Z?02C0
< z?000000000000000000000000000000
< M?0001
< KL00020200
< a?070102000100000000> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5
< SM000000
< DT2024121718330200
< AL0701016C0301
< a?070102000100000000
< KL00020200
< MD0001
< DT2024121718330300
< AL0701016C0301
< a?070102000100000000
< KL00020200
< SM000000
< MD0001
< DT2024121718330800
< AL0701016C0301
< a?070102000100000000
< KL00020200
< SM000000
< SM000000
< SM000000
< SM000140
< SM000000> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> DAC512531101
< RA0000
< SS190023
< SS19001E> DAC512531100
< RA0000> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> U?
< U?0A076211> LT01
< OK> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5> UB04010A07E1
< UBF5
< LU00

I have a battery warning, would it be the problem?

[slychiu]

\"UBF5\" reply means F0 on the keypad has not been pressed. Dont type F0 in Monitor I/O.  Press F and 0 on the keypad before you do the upgrade

[Ingo]

[user=4799]phil1155[/user] wrote:

Hello, I have not touch my comfort for a while, using comfort2mqtt (koochyrat) on a debian vm. Installing and playing with HA, I found this post and added on my HA.
I can see that bridge and comfort ultra are created, but got an error when starting the add on. HA find the comfort, I see the log but stop with \"list index out of range, halt with exit code 1\".
My comfort firmware is 7.142. My battery is currently in error ( low battery\").
I tried to upgrade the firmware with comfigurator over ethernet, but got DUT error.

Before I dismount things , may be you could point me to another reason the add on stops. I guess its not because of the battery. Thank you for the addon and your help here

Without supplying the full DEBUG output of the AddOn I cannot suggest any course of action. Please provide the AddOn DEBUG output at the time of the failure.

[phil1155]

Thanks Ingo and Chiu, I reinstall the addon, following Chiu part1 to 5 rcommendations.And updated the firmware, replaced my battery. I finally had the 3 comfort devices. So far so good, the alarm control panel in HA works. But after upgrading again my firmware, and rebooting my HA, I see now just two comfort devices, bridge and ultra. But the alarm control panel still works. The log seems ok, I guess the problem is not because of the cclx file not in ha addon?
Many thanks to both .

My new problem is phone controler trouble. the phone line has been disconnected 15 years ago and no line in /out plugs any more on comfort. The \"ignore line cut\" is Y. I dont see other point to investigate, by reading the forum. Any suggestion? Thanks

[slychiu]

Whrere do you see the phone trouble alar,, on Comfort Keypad or the Home assistant app? There is no phone trouble alarm AL03.... in the logs so I dont think it is caused by Comfort

[slychiu]

This topic is very long, please continue at

http://www.comfortforums.com/forum143/5579.html