Single chirp from bellbox every 10 seconds

[Pharris14]

A single chirp from the bellbox sounder every 10 seconds, this seems to occur after a battery test but continues long after the test is finished. There is a corresponding voltage drop pulse seen on the 12v supply, approximately 1v drop around 300mSec duration. I have isolated the supply to the PIRs and vibration sensors but the chirp remains. The voltage dip is still seen if the bellbox is disconnected.

[slychiu]

That chirpo is due to the siren type pr sound type in Alarms. Look in alarm Types low battery - what siren tupe is assigned to it?

[Pharris14]

That chirpo is due to the siren type pr sound type in Alarms. Look in alarm Types low battery - what siren tupe is assigned to it?

LowBattery is assigned Short Trouble and is assigned to keypads only, not bell output.

I have replaced the battery but the chirp remianed, however it has now stopped chirping after several hours.

[slychiu]

If it happens again, send the cclx file to support@cytech.biz