Bypassing a zone

[TheMax74]

There is an italian vocabulary for comfort too.
Answering machine will speak announces in italian.

[emabonacchi]

Where can i find it?

[user=1104]TheMax74[/user] wrote:

There is an italian vocabulary for comfort too.
Answering machine will speak announces in italian.

[TheMax74]

Ask Chiu or an Admin.

[slychiu]

The italian voice can be found at http://www.comfortforums.com/view_topic.php?id=1666&forum_id=25&highlight=italian

You need to use Comfigurator 3 and a UCM for this.
The Comfort firmware should first be upgraded to the new version 5.212 see http://www.comfortforums.com/view_topic.php?id=1970&forum_id=79&jump_to=7915#p7915 as the later versions improve the vocabulary upgrade process to reduce errors

[emabonacchi]

Trying to update the firmware i receive a message -DUT is not connected-.

What does it means?

[slychiu]

It means that the programmming cable is not connected, see the instructions for firmware upgrading in http://www.comfortforums.com/forum4/1216.html

[emabonacchi]

I have bought a new pc, so now i can use comfigurator3.

I have updated the firmware and installed the new voice.

 

Now, X10 commands are not more received and sent... obviously, now i am in the panic....

[slychiu]

Check your program again, se if theer is any problem in the conversion
Have you done write to Comfort wityhe the cclx file?

[emabonacchi]

Sure. I have writted the cclx file and not the ccl file.

 

And now i have another problem.... this message on the lcd screen

 Text wrong push#1 togheter

Then a message  Downloading, but many minutes passed and nothing happens.....

 

I have done a bad thing trying to update the system i think.....

[emabonacchi]

After resetting the system again and again, x10 does works again, but on the lcd screen of the keypads, i have still the same problem.