I have seen mention of the UCM/Pi module and Node Red supporting two way HomeKit connectivity.
I suspect this is via HomeBridge rather than an official integration with HomeKit.
Is there any plan to get official HomeKit approval from Apple?
Can it actually allow Comfort to both access HomeKit devices and to let HomeKit access Comfort devices? I know that so far uniquely the HomeAssistant software can do this but most systems only allow exporting to HomeKit via HomeBridge.

Hi all,
I believe it\'s possible to add 2 window contacts to a single zone, I presume that they are just wired together in the terminal block? is there something i need to do via comfigurator 
Many thanks

Hi all,
My system doesn\'t have a battery attached, i understand that i\'ll need to purchase one but can the system function ok without? I had a battery error on the keypad today, i believe it\'s the system check that its ok? can i turn it off?
Cheers

Hello,
I\'ve just recently moved into a house that is fitted with C-bus and Comfort, c-bus is up and running no problem but the comfort system hasn\'t worked for years.
This is my setup 
PC01-050B (1) and PC01-051B (1)UTL 5.113RS232 UCM 5.92 (PC01-017E)
From what i can tell is that it is still possible to update the UTL as its 5.113 (anything less and it wouldn\'t be possible) is that correct?
I have ordered a Eht03 UCM to replace the old RS232. 
Am I flogging a dead horse or is it possible to update the firmware and start over?
Any advice will be much appreciated.
cheers

Hi all

I have decided to sell my Comfort system, which includes the following:

- Comfort II Ultra
- UCM/General + ETH03
- UCM/Universal
- LEM03 Local expansion module with 16 inputs
- RLY01 Relay module
- EN01 metal enclosure with transformer, tamper switches and keys.

The Controller and UCMs are all running the latest firmware and have been reset to factory defaults. Everything is in excellent condition and working order.

All of this cost me £724 to buy, but I am offering it for £180 including insured delivery within the UK.

Please ask if you have any questions. I can take some more photos on request.

Greg

Attached Files

Thumbnail(s)
   

Hello
I’m the developer of sonospollytts node-red palette. https://flows.nodered.org/node/node-red-...ospollytts
Is someone with ucm/pi and node-red, able to test if it works?
Thanks.

[size=I want to shunt my two garage doors and the garage PIR when the doors are opened with the door remote control. I have a response from a RIO input from the remote opener. However I also have the garage doors as an entry zone and when I arm the system the \"final door\" doesn\'t activate as the bypass has turned on. I can\'t seem to find the logic that will only allow the bypass when the system has armed.]

I\'m interested in the KT05, but I\'d like to see it in action. Does anyone know of a source of videos and pictures of it in use?
Thanks!

We have a set up that allows us to monitor bus systems remotely.
I would like to be able to monitor the comfort bus remotely.
I realise that the log files don\'t report the events I\'m after monitoring.

Q - can I set up a response so that a zone is monitored and every time the zone is open or closed a signal is sent out over the Eth03 UCM ( or other device route) so that it can be picked up and monitored by our software?
Q - - can I set comfort so that the bus is monitored ( thereby we can extract all/any event we like) so that a continuous signal is sent out over the Eth03 UCM ( or other device route) so that it can be picked up and monitored by our software?

while updating the system from 7.140 to 7.142 I got a time out message and now nothing works, cant even login.