I\'m having an odd problem which probably needs a more considered brain than mine to find a resolution to.I would like to use ST to give me an armed and unarmed status. I\'ve tried to achieve this quite simply by stating IF Alarm is Day or Away set to On therefore ST sets to ARMED.If Alarm is OFF then ST sets to Unarmed.All nearly works the set to Armed status is fine. However when I enter the home it trips into an \"intrusion detected\" status obviously because the \"front door\" has been opened AND \"siren and Audio is muted\".I assume correctly that this is an integral element of Comfort\'s Day/Away status.Any ideas or ways around this?

UCM/Modbus firmware 7.099 fixes the bug in previous versions

For Modbus Master Mode, Alarm to Modbus mapping did not work

Please upgrade the firmware. In Modules Tab, select UCM/Modbus on the left pane and right click, then select Check for Upgrades\"

Cbus to KNX Bus Translator software 1.1.0 fixes the following bug;

Custom Applications could not be selected if they have the same Group address a the lighting application (56) in Cbus to KNX Mapping Table
For example  if Lighting Applixation group address 1 is in the Cbus to KNX Maping table, the Custom application 136 (and any other custom applications) could not select Group address 1

Please download from https://www.cytech.biz/product_details.php?item_id=338

Also please upgrade cbus to knx firmware to 1.008 see http://www.comfortforums.com/forum103/4639.html

Cbus to knx 1.008
Bugs Fixed (from 1.004)

• Custom Application did not work from cbus. Allow custom applications  to work like lighting application from cbus
• Fixed BUG due to cbusknx Bus Translator Configurator software does not sort application/Group Address in ascending order
  

Upgrading to Comfort II with a board I bought back in 2010 (don\'t ask why it has taken so long!)
Using Comfiguratior 3.11.10.0.Upgraded the ULT34 firmware to latest 7.xx
Translated the previous .ccl fileover to .cclx ULT34.Notice some words used previously have change so amended them but system basically works other than Comfigurator throwing System.Exceptions errors reading vocust.cfg (see attached screen shots). No entry found for Standard residential. I have tried to change this to English residential in Comfigurator but doesn\'t seem to have an effect.
Also the system report seems to show all them vocabulary parameter as 0... 
Do I update Comfort II vocab? Sentence only?If so which files do I use??

Attached Files

Thumbnail(s)
   

I just upgrade my airtel broadband connection from ADSL to VDSL (V-Fiber Technology) after that I am not able to sign in in to comfort using my local telephone line

so I want to know that comfort supports these kind of upgrade, means is this kind of upgrade effects comfort

and is there any thing I can do to correct it.

We have just moved to a house with the comfort system installed. The phone worked fine until someone rang the bell at the gate and I answered the phone. Now picking up the receiver I just hear \'phone trouble please sign in\'.

I have plugged the phone into the Bt test socket (behind the face of the Bt master socket) and it works fine. However, all other sockets are still phone trouble and there is another alarm system (CIA) who need the phone line and say they can dial in as the engaged tone is hear.

How can I clear the line?

Thanks

I have two (experimental) Z-Wave networks each with their own UCM/Z-Wave.

UCM02 is part of a Vera Edge network and UCM03 is part of a Fibaro network. Both UCMs have learnt the devices in their respective networks and those devices correctly appear in the Z-Wave mapping screens in Comfigurator Modules.

When I try to write a response to perform a basic get or set command for a Z-Wave device, if the UCM Name is set to UCM02 (default) then the Devices that appear in the Device IDs pop-up are correctly the ones for the UCM02 network. However, if I change the UCM Name to UCM03, then the devices that appear are again the UCM02 network devices, not the UCM03 network devices.

I can work round the problem by adding a command for UCM02 then manually editing the response or the action codes changing the UCM number and the deviceID but clearly it would be nicer if Comfigurator displayed the correct Device IDs.

I am using Comfigurator V3.11.10.0

I Have two SCS 6 although they both function as they should, the 2nd SCS will not be recognised in comfigurator as a SCS it will only be recognised as a RIO although it is occupying 137 to 142 with the correct jumpers for SCS ID 2. Does anyone know how to get round this little issue....

I have a keypad KP04A-WI.  There is a \"Off\" led at bottom left.  When the alarm is in disarm state, the LED will switch on.  Can we turn off this led?